- Sort by Popularity
- Display 12 Products per page
-
511-726-20 | BORE GAGE SERIES 511, 250-400mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-726
Range: 250-400 mm
Description:
• Longer plunger stroke with no effect on accuracy.
• Carbide is used for the contact point ensuring high durability and wear resistance.
• This model reduces the influence of heat from the operator’s hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement.
• The indicator (dial indicator, Digimatic indicator) and dial protection cover are optional. Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.
• Optional Extension Rods can be attached for measuring deep holes.
• A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement. -
511-416 | BORE GAGES SERRIES 511 – for BLIND HOLES, 35-60mm | MITUTOYO
BORE GAGE SERIES 511 FOR BLIND HOLES
Order No.: 511-416
Range: 35-60mm
Description :
• Capable of ID (inside diameter) measurement close to the bottom of a hole.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• Optional Extension Rods can be attached for measuring deep holes. -
177-246 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-246
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
177-318 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-318
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
500-719-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-719-20
Range : 0 – 150 mm
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-156-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
Order No. : 500-156-30
Range : 0-200 mm
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
500-454 | ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED | MITUTOYO
ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED
Order No.: 500-454
Range : 0-150 mm
Description:
This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
- You can operate it in just 60 lux ambient lighting.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
-
532-120 | VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT 0-180mm/0-7″ | MITUTOYO
VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT
Order No.: 532-120
Range : 0-180 mm / 0-7 in
Description :
• Fine-adjustment aids slider positioning.
• Allows step measurement. -
505-731 | DIAL CALIPER SERIES 505 – 0-200mm | MITUTOYO
DIAL CALIPER SERIES 505
Order No.: 505-731
Range : 0-200 mm
Description :
This metric dial caliper allows you to take reliable measurements and offers you the following benefits:
- Ultra-smooth sliding and high shock protection
- Easy to read dial with large character height
-
552-185-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with interchangeable jaw, 0-2000mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with interchangeable jaw
Order No.: 552-185-10
Range: 0-2000mm
Description:
This is a lightweight standard model of Digimatic caliper with optional interchangeable jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fiber reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
534-102 | LONG JAW VERNIER CALIPER-SERIES 534, 0-500mm / 0-20″ | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-102
Range : 0-500 mm / 0-20″
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
-
573-719-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 – EDGE-TO-CENTER TYPE, 10.1-300mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
EDGE-TO-CENTER TYPE
Order No.: 573-719-20
Range: 10.1-300 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
