- Sort by Popularity
- Display 24 Products per page
-
157-106 | OPTICAL PARALLELS – SERIES 157 | MITUTOYO
OPTICAL PARALLELS SET, METRIC
Order No. 157-106
Description
• Designed to inspect parallelism and flatness of measuring faces of micrometers.
• Each set consists of 4 sizes to aid in testing parallelism at various angular positions of the micrometer spindle. -
151-212 | Micrometer Heads – Medium-size standard Type with 8mm Diameter Spindle – SERIES 151 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE
With 8mm Diameter Spindle – SERIES 151
MITUTOYO
Order no. 151-212
Range: 0-25mm
Description :
• Larger spindle (ø8 mm) for heavy-duty applications (normally ø6.35 mm).
-
QV-APEX PRO SERIES | Standard CNC Vision Measuring System | MITUTOYO
CNC Vision Measuring System.
Standard QV-Apex 320 Pro/404 Pro/606 Pro Series
This is a superior model of QUICK VISION, which is equipped with the StrobeSnap function as standard, enabling high-speed measurement.
• This is a superior model of QUICK VISION, which isequipped with the StrobeSnap function as standard,enabling high-speed measurement.
• We offer a model with tracking auto focus (TAF) thatquickly focuses on the object improving throughputsignificantly.
• The camera motion and the strobe light are synchronizedto make non-stop vision measurements without stoppingthe stage. This makes it possible to use STREAM toshorten measuring time dramatically. -
H240 | Internal measurement – Measuring range : 40-60 mm | KROEPLIN
Internal measurement
Measuring range : 40-60 mm
Order No. : H240
-
311-225 | SQUARE METER SERIES 311 – Squareness/Straightness Measuring | MITUTOYO
• Squareness (perpendicularity) and straightness measurements can be performed accurately and efficiently by just moving a lever. Use the vertical motion handle on the rear of the main unit for operation.
• Highly accurate measurement of squareness and straightness is available by calibrating a square as a master using the built-in perpendicularity adjustment mechanism. Prepare a square to be used for accuracy check/adjustment separately.
• Sliding force: Approx. 2 to 5 N
-
339-102 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 8-9″ | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-102
Range : 8-9″
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
208062 | Spindle Attachment Tip Spline for Micrometer Anvils 6.35mm | MITUTOYO
SPINDLE ATTACHMENT TIP SPLINE
Order No. 208062
Description
These spindle attachment tips give you an economical way to adapt a micrometer spindle for different tasks.
They offer the following benefits:- You can use the tips on a micrometer spindle as an economical adaptation for particular measurement applications.
- They can also be mounted on micrometer anvils ø 6.35 mm.
- The measuring range changes when a spindle attachment tip is mounted.
-
570-322 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – WITH ERGONOMIC BASE, 0-300mm | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
WITH ERGONOMIC BASE
Order No.: 570-322
Range: 0-300 mm
Description:
This Digimatic height gauge is very precise and reliable, and offers you the following benefits:
- Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur.
- It comes with large and smooth-acting slider hand wheel
- A carbide-tipped scriber is provided.
- SPC data output.
-
406-251-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 25-50 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 25-50 mm
Resolution : 0.001 mm
Order No. : 406-251-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
157-903 | OPTICAL PARALLELS – SERIES 157 | MITUTOYO
OPTICAL PARALLELS SET, METRIC 0-25 mm
Order No. 157-903
Description
• Designed to inspect parallelism and flatness of measuring faces of micrometers.
• Each set consists of 4 sizes to aid in testing parallelism at various angular positions of the micrometer spindle. -
293-182-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed Inch/Metric, 2-3″ | MITUTOYO
Digital Micrometer QuantuMike IP65
Inch/Metric, 2-3″• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions.
