- Sort by Popularity
- Display 12 Products per page
-
511-774-20 | BORE GAGE SERIES 511 – SHORT LEG TYPE, 100-160mm | MITUTOYO
BORE GAGE SERIES 511 – SHORT LEG TYPE
Order No.: 511-774-20
Range: 100-160 mm
Description:
• As it is light and easy to handle with a short rod below the grip, the operator can work smoothly when inserting it into a narrow space or measuring an object on the table.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
953553 | EXTENSION ROD SERIES 511 – ACCESSORIES FOR BORE GAGE | MITUTOYO
EXTENSION ROD SERIES 511 – ACCESSORIES FOR BORE GAGE | MITUTOYO
Order No. 953553
Description
• Extension Rods enable measurement of deeper holes when attached to a bore gage.
Note 1: When using an extension rod that is 500 mm or longer, hold the bore gage upright during measurement.
Note 2: Only one extension rod can be attached to a bore gage. It is not possible to use more than one extension rod.
Note 3: The extension rod cannot be used for products with a custom size or custom specifications.
-
177-126 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-126
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
177-424 | SETTING RINGS SERIES 177 – CERA | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-424
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
500-736-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-736-20
Range : 0-8″
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-176-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide-tipped jaws for outside measurement*
Order No. : 500-176-30
Range : 0-8″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
530-100 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-100mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-100
Range : 0 – 100 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
550-311-20 | ABSOLUTE DIGIMATIC CALIPER 550 SERIES – WITH NIB STYLE JAWS 0-8″/0-200mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 550 SERIES – WITH NIB STYLE JAWS
Order No. : 550-311-20
Range : 0-8″/0-200mm
Description :
This is a Digimatic caliper with nib-style jaws that lets you measure inside dimensions.
It offers you the following benefits:- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.
-
914057 | DISTANCE MEASUREMENT JAW – OPTION ACCESSORIES | MITUTOYO
DISTANCE MEASUREMENT JAW – OPTION ACCESSORIES
Order No. : 914057
For item : 552-302-10 / 552-115-10 / 552-303-10 / 552-156-10 / 552-304-10 / 552-305-10 / 552-306-10
-
07CZA060 | INTERCHANGEABLE JAWS – OPTIONAL ACCESSORIES | MITUTOYO
INTERCHANGEABLE JAWS – OPTIONAL ACCESSORIES
Order No.: 07CZA060
Type: Centerline Type
-
573-614-20 | OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-300mm | MITUTOYO
OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-614-20
Range : 0-300 mm
Description :
These offset calipers enable you to measure stepped workpieces.
They offer you the following benefits:- You can adjust the beam-mounted jaw to facilitate measurement of stepped sections and hard-to-reach workpiece features.
-
573-643-20 | ABSOLUTE INSIDE CALIPER SERIES 573, KNIFE-EDGE, 10-200 mm | MITUTOYO
ABSOLUTE INSIDE CALIPER SERIES 573
KNIFE-EDGE (Without thumb roller)
Order No.: 573-643-20
Range : 10-200 mm
Description :
These Digital Knife Edge Caliper offer you the following benefits:
- Specially designed to let you take inside measurements in hard-to-reach places.
- With long narrow jaws.
