VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT

Order No.: 532-103

Range : 0-280 mm

Description :

• Fine-adjustment aids slider positioning.
• Allows step measurement.

VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT

Order No.: 532-101

Range : 0-130 mm

Description :

• Fine-adjustment aids slider positioning.
• Allows step measurement.

VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale

*High accuracy model: ±0.04mm

Order No. 530-119

Range : 0-300mm/0-12″

Description :

• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.

VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale

Order No. 530-115

Range : 0-300mm/0-12″

Description :

• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.

VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale

*High accuracy model: ±0.03mm

Order No. 530-118

Range : 0-200mm/0-8″

Description :

• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.

VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale

Order No. 530-114

Range : 0-200mm/0-8″

Description :

• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.

VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale

*High accuracy model: ±0.03mm

Order No. 530-312

Range : 0-150mm/0-6″

Description :

• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.

VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale

*Clamping screw below the slider

Order No. 530-316

Range : 0-150mm/0-6″

Description :

• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.

VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale

Order No. 530-104

Range : 0-150mm/0-6″

Description :

VERNIER CALIPER SERIES 530 – STANDARD MODEL

Order No. 530-502

Range : 0 – 1000 mm

Description :

• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.

VERNIER CALIPER SERIES 530 – STANDARD MODEL

Order No. 530-501

Range : 0 – 600 mm

Description :

• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.

VERNIER CALIPER – STANDARD MODEL

*Carbide-Tipped jaws for outside measurement*

Order No. 530-322

Range : 0 – 300 mm

Description :

• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.