มิตูโตโย

HIGH ACCURACY DIGITAL MICROMETER 0-25mm

ABSOLUTE DIGIMATIC  SERIES 293

Order No. 293-100-10

ABSOLUTE DIGIMATIC CALIPER 550 SERIES – WITH NIB STYLE JAWS

Order No. : 550-301-20

Range : 0-200 mm

Description :

This is a Digimatic caliper with nib-style jaws that lets you measure inside dimensions.
It offers you the following benefits:

• Rounded measuring surfaces enable you to measure inside dimensions.
• ABSOLUTE System delivers reliable measurements.

ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573

EDGE-TO-CENTER TYPE

Order No.: 573-718-20

Range: 10.1-200 mm

Description : 

The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:

• Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
• You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
• Direct reading of pitch measurements is also available due to the offset value setting function.

TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE

Order No.: 339-102

Range : 8-9″

Description :

• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid.

TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE (main unit)

CARBIDE-TIPPED

Order No. 137-013

Range : 50-63 mm

Description :

• Micrometer head for Extension-Rod Type inside micrometer.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings and Gauge Block Accessory Sets are available as reference gages for datum adjustment.

TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE

Order No.: 339-101

Range : 200-225 mm

Description :

• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid.

TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE

Order No. : 133-143

Range : 50-75mm

Description :

• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment.

TUBULAR INSIDE MICROMETERS SERIES 139 – EXTENSION PIPE TYPE (main unit)

Order No. 137-019

Range : 50-63 mm

Description :

• Micrometer head for Extension-Pipe Type inside micrometer.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings, CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages for datum adjustment.

INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE

Order No. 141-001

Range: 25-32mm

Description:

• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods.

INSIDE MICROMETER SERIES 345 – CALIPER TYPE

Order No. 345-250-30

Range: 5-30 mm

Description:

• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment.

2-POINT INTERNAL MICROMETER HOLTEST  | MITUTOYO

Order No. 368-002

Range. 2.5-3mm

Description

• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range.

DIGIMATIC HOLTEST – 3-POINT

INTERNAL MICORMETER

Order No. : 468-161

Range : 6-8 mm

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.