- Sort by Popularity
- Display 12 Products per page
-
395-252-30 | Tube Micrometer, 25-50mm | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-252-30
Range: 25-50mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
115-308 | Tube Micrometer – Spherical and Cylindrical Anvil Type, 0-25mm | MITUTOYO
TUBE MICROMETER – SPHERICAL AND CYLINDRICAL ANVIL TYPE – SERIES 115
Range : 0-25 mm
Order No. 115-308
• Spindle face: Carbide.
• Series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
111-123 | Spline Micrometer, 200-225 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-123
Range. : 200-225 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
112-215 | Point Micrometer with Carbide Tip – Series 112, 50-75 mm | MITUTOYO
POINT MICROMETER with Carbide tip – SERIES 112
Order No. : 112-215
Range : 50-75 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
155-128 | Telescoping Gage – Series 155 | MITUTOYO
TELESCOPIC GAGE – SERIES 155
Order No. 155-128
• A spring-loaded plunger expands within a bore (or groove) and is locked in place allowing measurement of diameter (or width) with an outside micrometer after extraction.
-
167-138 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-138
Length : 950 mm
-
148-311-10 | Micrometer Heads – Short Thimble with Choice of Diameter – SERIES 148 | MITUTOYO
MICROMETER HEAD – SHORT THIMBLE WITH CHOICE OF DIAMETER – SERIES 148
Order no. 148-311-10
Range: 0-13mm
Description :
• Short body design maintains measuring range for limited space applications.
• Available in three thimble diameters to provide ease-of-reading options.
-
150-822 | Micrometer Heads – Medium-size standard Type – SERIES 150 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE – SERIES 150
Order no. 150-822
Range: 0-25mm
Description :
• Measuring range of 25 mm.
-
148-243-10 | Micrometer Heads – Fine Spindle Feed of 0.1mm/rev – SERIES 148 | MITUTOYO
MICROMETER HEAD – FINE SPINDLE FEED OF 0.1mm/rev – SERIES 148
MITUTOYO
Order no. 148-243-10
Range: 0-6.5mm
Description :
- Highly accurate 0.1 mm pitch thread is only one-fifth of that used for a standard-pitch head (0.5 mm).
- External dimensions are compatible with standard 0.5 mm pitch heads.
-
468-168 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER
Order No. : 468-168
Range : 30-40 mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance. -
468-279 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-279
Range : 9-10″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-166 | Holtest – Three-Point Internal Micrometer Holtest 20-25mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-166
Range. 20-25 mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range.
