- Sort by Popularity
- Display 12 Products per page
-
534-103 | LONG JAW VERNIER CALIPER-SERIES 534, 0-750mm / 0-30″ | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-103
Range : 0-750 mm / 0-30″
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
-
516-376 | Rectangular Gauge Block Sets (0.001 mm Step Block Sets)-CERAMIC : SERIES 516 | MITUTOYO
Rectangular Gauge Block Sets – Ceramic : SERIES 516
0.001 mm Step Block Sets
Order No. : 516-376
• Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required
by the target applications, the level of convenience desired and the environmental conditions in which they will be used. -
516-831 | Rectangular Gauge Block Sets (Wear Block Sets)-Ceramic : SERIES 516 | MITUTOYO
Rectangular Gauge Block Sets – Ceramic : SERIES 516
Wear Block Sets
Order No. : 516-831
• Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required
by the target applications, the level of convenience desired and the environmental conditions in which they will be used. -
511-209 | BORE GAGE SERIES 511 – FOR SMALL HOLES, 6-10mm | MITUTOYO
BORE GAGE SERIES 511 – FOR SMALL HOLES
Order No. 511-209
Range: 6 – 10mm
Description :
• These gages are designed to measure the diameters of very small holes.
• Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.
• Customized products with a longer rod below the grip or with a carbide anvil are available upon request. -
395-251-30 | Tube Micrometer, 0-25mm | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-251-30
Range : 0-25mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
293-143-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 75-100mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 75-100mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-330-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Inch / Metric
Range : 0-1″ mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-679-20 | Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293, 3-4.2″ | MITUTOYO
Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293
Order No. 293-679-20
Range : 3-4.2″• The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation which enables widely differently sized features to be measured quickly.
• Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error.
• Measuring faces: Carbide.
• Supplied with a Ratchet Stop for constant measuring force. -
102-701 | Ratchet Thimble Micrometer Series 102 – Outside Micrometer, 0-25 mm, 0.01 mm | MITUTOYO
Ratchet Thimble Micrometer – Outside Micrometer
Range : 0-25 mm
Graduation : 0.01 mm
Order No. 102-701• More accurate in easy one-handed operation.
• Ratchet function works both from the thimble and the speeder.
• Rotating the thimble/speeder causes the ratchet mechanism to operate and apply a constant measuring force to the workpiece.
• Heat-insulated frame.
• Measuring faces: Carbide. -
103-166 | Outside Micrometer Series 103, 725-750 mm | Mitutoyo
Outside Micrometer Series 103
Range 725-750 mm
Graduation 0.01 mm
Order No. 103-166
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
107-204 | Indicator Type Micrometer Series 107, 75-100 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 75-100 mm
Order No. : 107-204
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
146-131 | Groove Micrometers -Rotating Spindle Series 146 – 0-1″, 0.25″ Flange | MITUTOYO
Groove Micrometers – Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-131
Flange : 0.25mm
