- Sort by Popularity
- Display 12 Products per page
-
103-163 | Outside Micrometer Series 103, 650-675 mm | Mitutoyo
Outside Micrometer Series 103
Range 650-675 mm
Graduation 0.01 mm
Order No. 103-163
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
406-352-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 2-3″ | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 2-3″
Resolution : 0.00005″/0.001 mm
Order No. : 406-352-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
422-231-30 | Blade Micrometer – Non-Rotating Spindle Type Series 422 | MITUTOYO
Blade Micrometer – Non-Rotating Spindle Type Series 422
ไมโครมิเตอร์ปากมีด
Order No. : 422-231-30
Range : 25-50 mm
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
340-521 | Outside Micrometer with Interchangeable Anvils, 400-500 mm | MITUTOYO
340-521
Outside Micrometer with Interchangeable Anvils | 400-500 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
104-140A | Outside Micrometer with Interchangeable Anvils, 100-200 mm | MITUTOYO
Order No. 104-140A
Outside Micrometer with Interchangeable Anvils
Range : 100-200 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force. -
125-105 | Screw Thread Micrometer, 0-25 mm, 3.5-5 mm/8-5TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-105
Range : 0-25 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
126-136 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 275-300 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-136
Range : 275-300 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
124-175 | Gear Tooth Micrometer, 50-75 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 124-175
Range : 50-75 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Equipped with Ratchet Stop for constant measuring force.
• Ball anvil / spindle tips: optional. -
389-351-30 | Sheet Metal Micrometer IP65, 0-1″, Flat Anvil/Spindle | MITUTOYO
SHEET METAL MICROMETER – SERIES 389
This Digimatic Sheet Metal Micrometer is designed with a deep frame, for measuring the thickness of sheet material.
Order No. 389-351-30
Range : 0-1″
Measuring Surface : Flat / Flat
• Measures thickness of sheet metal.
• Measuring faces: Carbide.
• Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
• Equipped with Ratchet Stop for constant measuring force. -
395-373-30 | Tube Micrometer – Spherical Anvil and Spindle Type, 2-3″ | MITUTOYO
TUBE MICROMETER – Spherical Anvil and Spindle Type – SERIES 395
Order No. 395-373-30
Range : 2-3″
• Measuring faces: Carbide.
(115-201: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
331-351-30 | Spline Micrometer, 0-1″ | MITUTOYO
SPLINE MICROMETER SERIES 331
Order No. 331-351-30
Range. : 0-1″
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• IP65 water / dust protection.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
342-361-30 | Point Micrometer – Series 342, 0-1″ | MITUTOYO
POINT MICROMETER – SERIES 342
Order No. : 342-361-30
Range : 0-1″
• Ideal tool for measuring drill web diameters, small grooves and other hard-to-reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• IP65 Digimatic micrometers.
• Equipped with Ratchet Stop for constant measuring force.
