- Sort by Date
- Display 12 Products per page
-
340-251-30 | Outside Micrometer with Interchangeable Anvils, 0-150 mm | MITUTOYO
340-251-30
Outside Micrometer with Interchangeable Anvils | 0-150 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
406-251-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 25-50 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 25-50 mm
Resolution : 0.001 mm
Order No. : 406-251-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
193-112 | Digit outside Micrometer Series 193, 25-50 mm | MITUTOYO
Digit Outside Micrometer Series 193
Range : 25-50 mm
Order No. : 193-112
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
293-140-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble.
Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions.
-
293-100-10 | HIGH-ACCURACY DIGIMATIC MICROMETER SERIES 293 | MITUTOYO
HIGH ACCURACY DIGITAL MICROMETER 0-25mm
ABSOLUTE DIGIMATIC SERIES 293
Order No. 293-100-10
-
Precision Square Level ระดับน้ำตั้งเครื่องแบบสี่เหลี่ยม RIKEN
Precision Square Level ระดับน้ำตั้งเครื่องแบบสี่เหลี่ยม RIKEN
-
182-501-50 | STANDARD SCALES SERIES 182 – Made of Low Expansion Glass | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are considered top-grade length standards.
• Standard scales can be used as a traceable standard of length for calibrating measuring instruments.
-
311-215 | SQUARE METER SERIES 311 – Squareness/Straightness Measuring | MITUTOYO
• Squareness (perpendicularity) and straightness measurements can be performed accurately and efficiently by just moving a lever. Use the vertical motion handle on the rear of the main unit for operation.
• Highly accurate measurement of squareness and straightness is available by calibrating a square as a master using the built-in perpendicularity adjustment mechanism. Prepare a square to be used for accuracy check/adjustment separately.
• Sliding force: Approx. 2 to 5 N
-
311-111 | HIGH PRECISION SQUARE SERIES 311 | MITUTOYO
• The High-Precision Square gage is used for inspecting the travel straightness and axial perpendicularity of moving elements on equipment, such as machine tools and CMMs.
• Four precision-lapped reference surfaces, finished using ultra-precision technology built on our experience in gauge blocks.
• Better than 1 μm/300 mm straightness and perpendicularity of each (four) reference surface. In addition, front and back faces are accurate to better than 5 μm/300 mm.
• Three nominal sizes are available (90×110, 160×210 and 260×310 mm) so that you can select the size that best suits the application.
-
515-520 | UNIVERSAL HEIGHT MASTER Series 515 – Usable in Vertical and Horizontal Orientations | MITUTOYO
• The Universal Height Master is designed for both vertical and horizontal orientation, providing a wide range of applications such as accuracy checking of machine tool table movements.
• Analog display by the built-in counter – the appearance and specifications are the same as 515-322.
-
515-322 | HEIGHT MASTER Series 515 | MITUTOYO
• For calibrating and setting height gages.
• Staggered arrangement of block stack have two measuring faces on the same level, one facing up and the other down
-
515-374 | DIGITAL HEIGHT MASTER Series 515 | MITUTOYO
• For calibrating and setting height gages.
• Staggered arrangement of block stack have two measuring faces on the same level, one facing up and the other down.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
