เครื่องมือวัดละเอียด

POINT MICROMETER with Carbide tip – SERIES 112

Order No. : 112-215

Range : 50-75 mm

• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force.

TELESCOPIC GAGE  – SERIES 155

Order No. 155-131

• A spring-loaded plunger expands within a bore (or groove) and is locked in place allowing measurement of diameter (or width) with an outside micrometer after extraction.

SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167

Description

• Used for adjusting the reference point of outside micrometers

Order No. 167-131

Length :  775 mm

SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167

Description

• Used for adjusting the reference point of outside micrometers

Order No. 167-388

Length :  1600 mm

SETTING STANDARD FOR SCREW THREAD MICROMETER – SERIES 167

Used for accurately setting screw thread micrometers at the start or end of the measuring range.

Whitworth θ = 55°

Order No. 167-277

DIGIMATIC MICROMETER HEAD – SERIES 350

Order no. 350-384-30

Stroke: 1″

Description :

• Equipped with digital display and output.
• 350-28X-30, 350-261-30, 350-38X-30 and 350-361-30 are protection grade IP65, water-proof Digimatic micrometer heads.
• Digimatic models can be easily integrated into statistical process control and measurement systems.

MICROMETER HEAD – SMALL STANDARD TYPE – SERIES 148

Order no. 148-823-10

Range: 0-13mm

Description :

• Measuring range of 13 mm.

MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE

With 8mm Diameter Spindle – SERIES 151

MITUTOYO

Order no. 151-221

Range: 0-25mm

Description :

• Larger spindle (ø8 mm) for heavy-duty applications (normally ø6.35 mm).

MICROMETER HEAD – FINE SPINDLE FEED OF 0.1mm/rev – SERIES 148

MITUTOYO

Order no. 148-242-10

Range: 0-6.5mm

Description :

• Highly accurate 0.1 mm pitch thread is only one-fifth of that used for a standard-pitch head (0.5 mm).
• External dimensions are compatible with standard 0.5 mm pitch heads.

FIXTURE FOR MICROMETER HEAD | MITUTOYO

Order No. : 303572

Description :

Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:

• These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
• Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO

Order No. : 468-177

Range : 175-200 mm

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO

Interchange-Head Set

Order No. : 468-977

Range : 0.5-0.8″

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.