- Sort by Popularity
- Display 12 Products per page
-
614672 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614672
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
167-336 | Setting Standard for V-Anvil Micrometer – Series 167 | MITUTOYO
SETTING STANDARD FOR V-ANVIL MICROMETER – SERIES 167
• Specially designed for accurately setting V-anvil micrometers.
Order No. 167-336
-
151-213 | Micrometer Heads – Medium-size standard Type with 8mm Diameter Spindle – SERIES 151 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE
With 8mm Diameter Spindle – SERIES 151
MITUTOYO
Order no. 151-213
Range: 0-25mm
Description :
• Larger spindle (ø8 mm) for heavy-duty applications (normally ø6.35 mm).
-
311-112 | HIGH PRECISION SQUARE SERIES 311 | MITUTOYO
• The High-Precision Square gage is used for inspecting the travel straightness and axial perpendicularity of moving elements on equipment, such as machine tools and CMMs.
• Four precision-lapped reference surfaces, finished using ultra-precision technology built on our experience in gauge blocks.
• Better than 1 μm/300 mm straightness and perpendicularity of each (four) reference surface. In addition, front and back faces are accurate to better than 5 μm/300 mm.
• Three nominal sizes are available (90×110, 160×210 and 260×310 mm) so that you can select the size that best suits the application.
-
137-013 | TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE (main unit) | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE (main unit)
CARBIDE-TIPPED
Order No. 137-013
Range : 50-63 mm
Description :
• Micrometer head for Extension-Rod Type inside micrometer.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
422-230-30 | Blade Micrometer – Non-Rotating Spindle Type Series 422 | MITUTOYO
Blade Micrometer – Non-Rotating Spindle Type Series 422
ไมโครมิเตอร์ปากมีด
Order No. : 422-230-30
Range : 0-25 mm
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
293-145-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
406-250-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 0-25 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 0-25 mm
Resolution : 0.001 mm
Order No. : 406-250-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
117-102 | “Uni-Mike” Interchangeable Anvil Micrometer, 25-50 mm | MITUTOYO
“Uni-Mike” Interchangeable Anvil Micrometer Series 117
Order No. 117-102
Range : 25-50 mm
• A selection of interchangeable anvils (rod anvils and V-anvils) enables measurement of tube thickness, rivet head height and similar features just by replacing the anvil to suit.
• Equipped with Ratchet Stop for constant measuring force. -
122-162 | Blade Micrometer – non rotating spindle type (Carbide tip) – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type (Carbide Tip) – Series 122
Range: 25-50 mm
Order No.: 122-162-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
105-417 | Outside Micrometer with Anvil Extension Collars 1900-2000 mm | MITUTOYO
Order No. 105-417
Outside Micrometer with Anvil Extension Collars
Range : 1900-2000 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-111 | Caliper Type Micrometers Series 143, 250-275 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-111
Range : 250-275 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.
