- Sort by Price
- Display 12 Products per page
-
523-141 | Snap Meters – Series 523, 0-25 mm | MITUTOYO
Snap Meters – Series 523
Order No. : 523-141
Range: 0-25 mm
• Suited for the measurement of mass-produced parts.
• Various indicators (optional) are available to suit accuracy and resolution requirements.
• Measuring faces: Carbide. -
511-501 | BORE GAGE SERIES 511 – ABSOLUTE DIGIMATIC BORE GAGE, 45-100mm | MITUTOYO
BORE GAGE SERIES 511 – ABSOLUTE DIGIMATIC BORE GAGE, 45-100mm | MITUTOYO
Order No. : 511-501
Range: 45-100 mm
Description
• These ABSOLUTE Digimatic bore gages are exclusively designed for inside diameter measurement.
• ABS (ABSOLUTE) type bore gages are not subject to overspeed error.
• Up to four Extension Rods (optional) can be connected for measuring at the bottom of a hole 2 m deep.
• The display and grip can be rotated up to 320° and the display can be inclined up to 90°, so that it is easily readable from any direction.
• The minimum value holding function provides easy measurement of hole diameter. -
125-101 | Screw Thread Micrometer, 0-25 mm, 0.4-0.5 mm/64-48TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-101
Range : 0-25 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
139-001 | TUBULAR INSIDE MICROMETERS SERIES 139 – EXTENSION PIPE TYPE (main unit) | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 139 – EXTENSION PIPE TYPE (main unit)
Order No. 137-019
Range : 50-63 mm
Description :
• Micrometer head for Extension-Pipe Type inside micrometer.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings, CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
342-251-30 | Point Micrometer – Series 342, 0-25 mm | MITUTOYO
POINT MICROMETER – SERIES 342
Order No. : 342-251-30
Range : 0-25 mm
• Ideal tool for measuring drill web diameters, small grooves and other hard-to-reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• IP65 Digimatic micrometers.
• Equipped with Ratchet Stop for constant measuring force. -
182-501-50 | STANDARD SCALES SERIES 182 – Made of Low Expansion Glass | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are considered top-grade length standards.
• Standard scales can be used as a traceable standard of length for calibrating measuring instruments.
-
155-905 | Telescoping Gage Set – Series 155 | MITUTOYO
TELESCOPIC GAGE SET – SERIES 155
Order No. 155-905
• A spring-loaded plunger expands within a bore (or groove) and is locked in place allowing measurement of diameter (or width) with an outside micrometer after extraction.
-
511-415 | BORE GAGE SERIES 511 FOR BLIND HOLES, 15-35mm | MITUTOYO
BORE GAGE SERIES 511 FOR BLIND HOLES
Order No.: 511-415
Range: 15-35mm
Description :
• Capable of ID (inside diameter) measurement close to the bottom of a hole.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• Optional Extension Rods can be attached for measuring deep holes. -
326-251-30 | Screw Thread Micrometer- Interchangeable Anvil/Spindle Tip Type 0-25 mm | MITUTOYO
Screw Thread Micrometers
Order No. 326-251-30
Range : 0-25 mm
• Use by installing a suitable interchangeable anvil/spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65,waterproof Digimatic screw thread micrometer with interchangeable anvil/spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils/spindle tips are optional. -
339-101 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 200-225 mm | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-101
Range : 200-225 mm
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
314-252-30 | V-Anvil Micrometer – 3 Flutes, 10-25 mm | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-252-30
Range : 10-25 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
Precision Square Level ระดับน้ำตั้งเครื่องแบบสี่เหลี่ยม RIKEN
Precision Square Level ระดับน้ำตั้งเครื่องแบบสี่เหลี่ยม RIKEN
