- Sort by Popularity
- Display 12 Products per page
-
311-245 | SQUARE METER SERIES 311 – Squareness/Straightness Measuring | MITUTOYO
• Squareness (perpendicularity) and straightness measurements can be performed accurately and efficiently by just moving a lever. Use the vertical motion handle on the rear of the main unit for operation.
• Highly accurate measurement of squareness and straightness is available by calibrating a square as a master using the built-in perpendicularity adjustment mechanism. Prepare a square to be used for accuracy check/adjustment separately.
• Sliding force: Approx. 2 to 5 N
-
406-251-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 25-50 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 25-50 mm
Resolution : 0.001 mm
Order No. : 406-251-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
05CZA624 | DIGIMATIC CABLE WITH DATA BUTTON IP TYPE 1m, CALIPER TYPE | MITUTOYO
DIGIMATIC CABLE WITH DATA BUTTON IP TYPE
1m, CALIPER TYPE
-
103-174 | Outside Micrometer Series 103, 925-950 mm | Mitutoyo
Outside Micrometer Series 103
Range 925-950 mm
Graduation 0.01 mm
Order No. 103-174
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
523-122 | Dial Snap Meter Series 510, 25-50 mm | MITUYOYO
Dial Snap Meter Series 510
Range : 25-50 mm
Order No. : 523-122
• Suitable for quick pass / fail inspection of mass-produced components.
• Greatly improved accuracy: indication accuracy and graduation of 1 μm.
• IP protection level: 54, coolant-splash resistant during grinding process.
• Hard-coated crystal: enhanced oil and scratch resistance. -
422-332-30 | Blade Micrometer – non rotating spindle type – Series 422 | Mitutoyo
Blade Micrometer – non rotating spindle type – Series 422
Range: 2-3″
Order No.: 422-332-30
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
340-721 | Outside Micrometer with Interchangeable Anvils, 18-24″ | MITUTOYO
340-721
Outside Micrometer with Interchangeable Anvils | 18-24″
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
104-148A | Outside Micrometer with Interchangeable Anvils, 900-1000 mm | MITUTOYO
Order No. 104-148A
Outside Micrometer with Interchangeable Anvils
Range : 900-1000 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force. -
125-115 | Screw Thread Micrometer, 50-75 mm, 5.5-7 mm / 4.5-3.5TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-115
Range : 50 – 75 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
223-102 | Disk Micrometer Series 223, 25-50 mm | MITUTOYO
Disk Micrometer (Mechanical counter Model)
Order No. 223-102
Range : 25-50 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
124-195 | Gear Tooth Micrometer, 275-300 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 124-195
Range : 275-300 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Equipped with Ratchet Stop for constant measuring force.
• Ball anvil / spindle tips: optional. -
118-103 | Sheet Metal Micrometer, 0-25mm, Flat Anvil/Spindle | MITUTOYO
SHEET METAL MICROMETER – SERIES 118
This Sheet Metal Micrometer is designed with a deep frame for measuring the thickness of sheet material.
Order No. 118-103
Range : 0-25
Throat depth : 300 mm
Measuring Surface : Flat / Flat
• Measures thickness of sheet metal.
• Measuring faces: Carbide.
• Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
• Equipped with Ratchet Stop for constant measuring force.
