- Sort by Name
- Display 12 Products per page
-
311-245 | SQUARE METER SERIES 311 – Squareness/Straightness Measuring | MITUTOYO
• Squareness (perpendicularity) and straightness measurements can be performed accurately and efficiently by just moving a lever. Use the vertical motion handle on the rear of the main unit for operation.
• Highly accurate measurement of squareness and straightness is available by calibrating a square as a master using the built-in perpendicularity adjustment mechanism. Prepare a square to be used for accuracy check/adjustment separately.
• Sliding force: Approx. 2 to 5 N
-
314-251-30 | V-Anvil Micrometer SERIES 314 – 3 Flutes, 1-15 mm | MITUTOYO
V-ANVIL MICROMETER SERIES 314 – 3 FLUTE
Order No. : 314-251-30
Range : 1-15 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
314-252-30 | V-Anvil Micrometer – 3 Flutes, 10-25 mm | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-252-30
Range : 10-25 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
314-253-30 | V-Anvil Micrometer – 3 Flutes, 25-40 mm | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-253-30
Range : 25-40 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
314-261-30 | V-Anvil Micrometer – 3 Flutes, 1-15 mm | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-261-30
Range : 1-15 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
314-262-30 | V-Anvil Micrometer – 3 Flutes, 10-25 mm | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-262-30
Range : 10-25 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
314-351-30 | V-Anvil Micrometer – 3 Flutes, 0.05-0.6″ | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-351-30
Range : 0.05-0.6″
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
314-352-30 | V-Anvil Micrometer – 3 Flutes, 0.4-1″ | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-352-30
Range : 0.4-1″
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
314-353-30 | V-Anvil Micrometer – 3 Flutes, 1-1.6″ | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-353-30
Range : 1-1.6″
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
314-361-30 | V-Anvil Micrometer – 3 Flutes, 0.05-0.6″ | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-361-30
Range : 0.05-0.6″
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
314-362-30 | V-Anvil Micrometer – 3 Flutes, 0.4-1″ | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-362-30
Range : 0.4-1″
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
317-251-30 | “Uni-Mike” Digital Interchangeable Anvil Micrometer, 0-25 mm, IP65 | MITUTOYO
“Uni-Mike” Digital Interchangeable Anvil Micrometer Series 317
Order No. 317-251-30
Range : 0 -25 mm
• A selection of interchangeable anvils (rod anvils and V-anvils) enables measurement of tube thickness, rivet head height and similar features just by replacing the anvil to suit.
• IP65 water / dust protection (series 317).
• Equipped with Ratchet Stop for constant measuring force.
