- Sort by Popularity
- Display 12 Products per page
-
515-114 | RISER BLOCKS Series 515 – POTIONAL ACCESSORIES | MITUTOYO
• The measuring range of a Height Master can be extended by using riser blocks.
• They can also be used on Square Master models 311-215 and 311-225.
-
311-215 | SQUARE METER SERIES 311 – Squareness/Straightness Measuring | MITUTOYO
• Squareness (perpendicularity) and straightness measurements can be performed accurately and efficiently by just moving a lever. Use the vertical motion handle on the rear of the main unit for operation.
• Highly accurate measurement of squareness and straightness is available by calibrating a square as a master using the built-in perpendicularity adjustment mechanism. Prepare a square to be used for accuracy check/adjustment separately.
• Sliding force: Approx. 2 to 5 N
-
523-141 | Snap Meters – Series 523, 0-25 mm | MITUTOYO
Snap Meters – Series 523
Order No. : 523-141
Range: 0-25 mm
• Suited for the measurement of mass-produced parts.
• Various indicators (optional) are available to suit accuracy and resolution requirements.
• Measuring faces: Carbide. -
103-166 | Outside Micrometer Series 103, 725-750 mm | Mitutoyo
Outside Micrometer Series 103
Range 725-750 mm
Graduation 0.01 mm
Order No. 103-166
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
700-118-30 | QUICKmini Series 700 | MITUTOYO
QUICKmini Series 700
Range : 0-5″ / 0-12 mm
Order No. : 700-118-30
• Lightweight, compact, palm-sized device.
• Measurement of small, thin workpieces is possible by only a single operation.
• Electromagnetic induction type ABSOLUTE encoder is adopted.
• Built-in ABS (absolute) scale requires no zero-set every time the power is turned on. In addition, reliability has improved by eliminating overspeed errors. -
422-260-30 | Blade Micrometer – Non-Rotating Spindle Type Series 422 | MITUTOYO
Blade Micrometer – Non-Rotating Spindle Type Series 422
ไมโครมิเตอร์ปากมีด
Order No. : 422-260-30
Range : 0-25 mm
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
340-524 | Outside Micrometer with Interchangeable Anvils, 700-800 mm | MITUTOYO
340-524
Outside Micrometer with Interchangeable Anvils | 700-800 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
104-142A | Outside Micrometer with Interchangeable Anvils, 300-400 mm | MITUTOYO
Order No. 104-142A
Outside Micrometer with Interchangeable Anvils
Range : 300-400 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force. -
125-108 | Screw Thread Micrometer, 25-50 mm, 1-1.75 mm/24-14TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-108
Range : 25-50 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
323-253-30 | Disk Micrometer Series 323, 75-100 mm, Disk 20mm | MITUTOYO
Disk Micrometer
Order No. 323-253-30
Range : 75-100 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
124-178 | Gear Tooth Micrometer, 125-150 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 124-178
Range : 125-150 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Equipped with Ratchet Stop for constant measuring force.
• Ball anvil / spindle tips: optional. -
389-714 | Sheet Metal Micrometer IP65, 0-1″, 12″ Throat, Flat Anvil/Spindle | MITUTOYO
SHEET METAL MICROMETER – SERIES 389
This Digimatic Sheet Metal Micrometer is designed with a deep frame, for measuring the thickness of sheet material.
Order No. 389-714
Range : 0-1″
Throat depth : 12″
Measuring Surface : Flat / Flat
• Measures thickness of sheet metal.
• Measuring faces: Carbide.
• Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
• Equipped with Ratchet Stop for constant measuring force.
