- Sort by Popularity
- Display 12 Products per page
-
611684 | Gauge Blocks with a Calibrated Coefficient of Thermal Expansion – 400mm | Mitutoyo
Gauge Blocks with a Calibrated Coefficient of Thermal Expansion – 400mm | Mitutoyo
Order No. : 611684
Length : 400 mm
Description :
• Mitutoyo offers top-quality gauge blocks (steel and ceramic), superior to K class blocks due to their advanced manufacturing technologies.
• Features an accurately calibrated thermal expansion coefficient measured with a proprietary double-faced interferometer (DFI). Each gauge block is calibrated for length on a highly accurate gauge block interferometer (GBI) system.
• Available as rectangular gauge blocks in the range 100 to 500 mm. -
515-724 | CHECK MASTER SERIES 515 | MITUTOYO
• Designed to check the accuracy of table movements of machine tools and calibrate CMMs. Permanently wrung stack of gauge blocks is housed in a rigid frame.
• Can be used in either vertical or horizontal orientation.
-
105-103 | Outside Micrometer with Anvil Extension Collars 500-600 mm | MITUTOYO
Order No. 105-103
Outside Micrometer with Anvil Extension Collars
Range : 500-600 mm
MITUTOYO
• Adjustable measuring range with extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
06AFM386 | USB-ITPAK VERSION 2.1 SOFTWARE WITH DONGLE | MITUTOYO
USB-ITPAK VERSION 2.1 SOFTWARE WITH DONGLE
-
193-101 | Digit outside Micrometer Series 193, 0-25 mm | MITUTOYO
Digit Outside Micrometer Series 193
Range : 0-25 mm
Order No. : 193-101
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
523-124 | Dial Snap Meter Series 510, 75-100 mm | MITUYOYO
Dial Snap Meter Series 510
Range : 75-100 mm
Order No. : 523-124
• Suitable for quick pass / fail inspection of mass-produced components.
• Greatly improved accuracy: indication accuracy and graduation of 1 μm.
• IP protection level: 54, coolant-splash resistant during grinding process.
• Hard-coated crystal: enhanced oil and scratch resistance. -
422-370-30 | Blade Micrometer – non rotating spindle type – Series 422 | Mitutoyo
Blade Micrometer – non rotating spindle type – Series 422
Range: 0-1″
Order No.: 422-370-30
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
104-171 | Outside Micrometer with Interchangeable Anvils, 0-50 mm | MITUTOYO
104-171
Outside Micrometer with Interchangeable Anvils | 0 – 50 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force. -
343-252-30 | Caliper Type Micrometers Series 343, 50-75 mm | MITUTOYO
Caliper Type Micrometers Series 343
Order No. 343-252-30
Range : 50-75 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
125-117 | Screw Thread Micrometer, 75-100 mm, 1-1.75 mm / 24-14 TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-117
Range : 75-100 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
123-101 | Disk Micrometer – Hardened Steel Disk Series 123, 0-25 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-101
Range : 0-25 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
369-251-30 | Disk Micrometer, IP65 – 25-50 mm, Non-Rotating Spindle, Disk=20mm | MITUTOYO
Disk Micrometer- IP65, Non-Rotating Spindle
Order No. : 369-251-30
Range : 25-50 mm
Disk : 20 mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module.
• Equipped with Ratchet Stop for constant measuring force.
