- Sort by Popularity
- Display 12 Products per page
-
105-417 | Outside Micrometer with Anvil Extension Collars 1900-2000 mm | MITUTOYO
Order No. 105-417
Outside Micrometer with Anvil Extension Collars
Range : 1900-2000 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-111 | Caliper Type Micrometers Series 143, 250-275 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-111
Range : 250-275 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-131 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 150-175 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-131
Range : 150-175 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
324-254-30 | Gear Tooth Micrometer IP65, 75-100 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 324-254-30
Range : 75-100 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• IP65 Digimatic gear tooth micrometers.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Ball anvil / spindle tips: optional. -
389-271-30 | Sheet Metal Micrometer IP65, 0-25mm, Spherical Anvil/Spindle | MITUTOYO
SHEET METAL MICROMETER – SERIES 389
This Digimatic Sheet Metal Micrometer is designed with a deep frame, for measuring the thickness of sheet material.
Order No. 389-271-30
Range : 0-25 mm
Measuring Surface : Spherical / Spherical
• Measures thickness of sheet metal.
• Measuring faces: Carbide.
• Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
• Equipped with Ratchet Stop for constant measuring force. -
395-272-30 | Tube Micrometer – Spherical Anvil and Spindle Type, 25-50mm | MITUTOYO
TUBE MICROMETER – Spherical Anvil and Spindle Type – SERIES 395
Order No. 395-272-30
Range : 25-50 mm
• Measuring faces: Carbide.
(115-201: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
331-254-30 | Spline Micrometer, 50-75mm | MITUTOYO
SPLINE MICROMETER SERIES 331
Order No. 331-254-30
Range. : 75-100 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• IP65 water / dust protection.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
342-264-30 | Point Micrometer – Series 342, 75-100 mm | MITUTOYO
POINT MICROMETER – SERIES 342
Order No. : 342-264-30
Range : 75-100 mm
• Ideal tool for measuring drill web diameters, small grooves and other hard-to-reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• IP65 Digimatic micrometers.
• Equipped with Ratchet Stop for constant measuring force. -
314-352-30 | V-Anvil Micrometer – 3 Flutes, 0.4-1″ | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-352-30
Range : 0.4-1″
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
167-108 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-108
Length : 200 mm
-
167-365 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-365
Length : 1025 mm
-
167-397 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-397
Length : 1825 mm
