- Sort by Price
- Display 12 Products per page
-
MX-500N/1000N | Motorized Test Stand MX Series | IMADA
Motorized Test Stand MX Series
Achieves high repeatability with constant testing speed and position
Handles a wide range of test applications such as tension, compression and peel test
Offers overload prevention and force control function when connected with force gauge ** Activated when ZTS/ZTA series force gauge and CB-508 cable are used together.
Three Modes
• Manual mode : The head moves when press and hold the button.
• Single cycle mode : The head starts moving after press the button, and it returns automatically when is reaches travel limit.
• Continuous cycle mode : The head repeats travelling between its upper and lower travel limit. -
573-605-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 10.1-160mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-605-20
Range 10.1-160 mm
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
526-170-10 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 0.95-1.55mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
บอร์เกจ – สำาหรับรูขนาดเล็กมาก
Order No.: 526-170-10
Range: 0.95-1.55 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø1 to 7 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
530-101 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm
Order No. 530-101
Range : 0 – 150mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
339-101 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 200-225 mm | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-101
Range : 200-225 mm
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
192-130 | DIAL HEIGHT GAGE SERIES 192 – WITH DIGITAL COUNTER, 0 – 300mm | MITUTOYO
DIAL HEIGHT GAGE SERIES 192
WITH DIGITAL COUNTER
Order No.: 192-130
Range: 0-300mm
Dimension :
This Dial Height Gauge offers you the following benefits:- It allows you easy and error-free reading with both up and down digital counters as well as a dial.
- It comes with a hand wheel so you can easily make rough adjustments.
- A carbide-tipped scriber is provided.