- Sort by Popularity
- Display 12 Products per page
-
H2M50 | Internal comparison measurement – Measuring range : 50-100 mm | KROEPLIN
Internal comparison measurement
Measuring range : 50-100 mm
Order No. : H2M50
-
511-803 | BORE GAGE SERIES 511 – WITH MICROMETER HEAD, 60-100mm | MITUTOYO
BORE GAGE SERIES 511 – WITH MICROMETER HEAD
Order No.: 511-803
Range: 60-100 mm
Description:
• This series includes models for measuring ø60 to 800 mm inside diameters.
• The micrometer head is used for dimensional setting. The dimension can be easily changed without replacing the anvil and washer.
• The contact point has a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
531-101 | VERNIER CALIPER SERIES 531 – WITH THUMB GRIP 0-150mm | MITUTOYO
VERNIER CALIPER 531 SERIES – WITH THUMB GRIP
Order No.: 531-101
Range : 0-150 mm
Description :
• The slider moves only when the spring loaded thumb grip is depressed.
• Allows step measurement.
-
311-215 | SQUARE METER SERIES 311 – Squareness/Straightness Measuring | MITUTOYO
• Squareness (perpendicularity) and straightness measurements can be performed accurately and efficiently by just moving a lever. Use the vertical motion handle on the rear of the main unit for operation.
• Highly accurate measurement of squareness and straightness is available by calibrating a square as a master using the built-in perpendicularity adjustment mechanism. Prepare a square to be used for accuracy check/adjustment separately.
• Sliding force: Approx. 2 to 5 N
-
123-109 | Disk Micrometer – Hardened Steel Disk Series 123, 200-225 mm, Disk=30 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-109
Range : 200-225 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
148-308-10 | Micrometer Heads – Short Thimble with Choice of Diameter – SERIES 148 | MITUTOYO
MICROMETER HEAD – SHORT THIMBLE WITH CHOICE OF DIAMETER – SERIES 148
Order no. 148-308-10
Range: 0-13mm
Description :
• Short body design maintains measuring range for limited space applications.
• Available in three thimble diameters to provide ease-of-reading options.
-
150-801 | Micrometer Heads – Medium-size standard Type – SERIES 150 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE – SERIES 150
Order no. 150-801
Range: 0-25mm
Description :
• Measuring range of 25 mm.
-
148-318 | Micrometer Heads – Locking-screw Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – LOCKING-SCREW TYPE – SERIES 148
MITUTOYO
Order no. 148-318
Range: 0-6.5mm
Description :
• Locking screw provides secure locking at any position of the spindle.
• Position of the locking screw is the same as the sleeve index line. -
152-389 | Micrometer Head – XY-Stage Type SERIES 152 | MITUTOYO
MICROMETER HEAD – XY-STAGE TYPE SERIES 152
MITUTOYO
ORDER NO. : 152-389
DESCRIPTION :
• Micrometer heads especially designed for accurate cross-travel stage control in X and Y axes.
-
04AZA164 | Precision Leadscrew – 25mm Stroke | MITUTOYO
PRECISION LEADSCREW | MITUTOYO
Order No. : 04AZA164
Range : 0-25 mm
Description :
- Mitutoyo manufacture simple and less expensive precision leadscrews for precise positioning mechanisms and fine-feed mechanisms, in addition to standard micrometer heads..
- Mitutoyo also manufacture leadscrews with special specifications, such as 0.25 mm pitch, as well as those with the standard 0.5 mm feed pitch and with dimensions and forms that meet customer requirements.
-
468-271 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-271
Range : 2.5-3″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-003 | Holtest – Two Point Internal Micrometer Holtest 3-4 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-003
Range. 3-4 mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range.
