เครื่องมือวัด

Disk Micrometer- IP65, Non-Rotating Spindle

Order No. : 369-250-30

Range : 0-25mm

Disk : 20 mm

• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module.
• Equipped with Ratchet Stop for constant measuring force.

MICROMETER HEAD – SMALL THIMBLE DIMETER STANDARD TYPE – SERIES 148

Order no. 148-503

Range: 0-13mm

Description :

• Measuring range of 13 mm.
• The thimble can be set to zero at any position by loosening the setscrew.

MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE

With 8mm Diameter Spindle – SERIES 151

MITUTOYO

Order no. 151-228-10

Range: 0-25mm

Description :

• Larger spindle (ø8 mm) for heavy-duty applications (normally ø6.35 mm).

MICROMETER HEAD – FINE SPINDLE FEED OF 0.1mm/rev – SERIES 148

MITUTOYO

Order no. 148-244

Range: 0-5mm

Description :

• Highly accurate 0.1 mm pitch thread is only one-fifth of that used for a standard-pitch head (0.5 mm).
• External dimensions are compatible with standard 0.5 mm pitch heads.

FIXTURE FOR MICROMETER HEAD | MITUTOYO

Order No. : 303581

Description :

Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:

• These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
• Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO

Order No. : 468-175

Range : 125-150 mm

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO

Interchange-Head Set

Order No. : 468-975

Range :100-200 mm

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

3-POINT INTERNAL MICROMETER HOLTEST  | MITUTOYO

Order No. 368-173

Range. 87-100 mm

Description

• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range.

3-POINT INTERNAL MICROMETER HOLTEST (TYPE II) MITUTOYO

Order No. : 368-780

Range: 250-275mm

Description

• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).

ABSOLUTE BOREMATIC SERIES 568

ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES

Range : 3-3.5″

Order No. : 568-472

Description :

This is a individual unit Three-Point Digimatic Snap Open Bore Gauge.
It offers you the following benefits:

• It enables you to take measurements easily and quickly.
• Titanium-coated measuring pins gives you excellent durability and impact resistance.
• 330° rotatable display unit also gives you easy reading at any angle.
• GO/NG tolerance judgement function.

TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE

Order No. : 133-154

Range : 325-350mm

Description :

• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment.

TUBULAR INSIDE MICROMETERS SERIES 337 – EXTENSION ROD TYPE

Order No. : 337-102

Range : 8-9″

Description :

• Wide range of inside measurements possible by combining Extension Rods and anvils with the micrometer head.
• Two types of measuring faces are available; with or without carbide tip. (The 337 Series is only available with carbide tip)
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.