- Sort by Popularity
- Display 12 Products per page
-
611679 | Individual Metric Rectangular Gauge Blocks – 90mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 90mm | Mitutoyo
Order No. : 611679
Length : 90 mm
Description :
• If using only one length repeatedly, it is suggested to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry. -
149-824-10 | Micrometer Heads – Small Standard Type with Carbide-Tipped Spindle – SERIES 149 | MITUTOYO
MICROMETER HEAD – SMALL STANDARD TYPE WITH CARBIDE-TIPPED SPINDLE – SERIES 149
Order no. 149-824-10
Range: 0-15mm
Description :
• Carbide-tipped spindle provides high abrasion resistance.
-
515-111 | AUXILIARY BLOCK KIT SERIES 515 – for BORE GAGE – OPTIONAL ACCESSORIES | MITUTOYO
• Used for efficient zero-setting of dial bore gages and tubular inside micrometers (18 – 150 mm) on a Height Master.
-
536-121 | POINT CALIPER SERIES 536, 0-150 mm | MITUTOYO
POINT CALIPER SERIES 536
Order No.: 536-121
Range : 0-150 mm
Description :
This vernier point caliper has extra fine ground measuring jaws. It offers you the following benefits:
- Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.
-
311-111 | HIGH PRECISION SQUARE SERIES 311 | MITUTOYO
• The High-Precision Square gage is used for inspecting the travel straightness and axial perpendicularity of moving elements on equipment, such as machine tools and CMMs.
• Four precision-lapped reference surfaces, finished using ultra-precision technology built on our experience in gauge blocks.
• Better than 1 μm/300 mm straightness and perpendicularity of each (four) reference surface. In addition, front and back faces are accurate to better than 5 μm/300 mm.
• Three nominal sizes are available (90×110, 160×210 and 260×310 mm) so that you can select the size that best suits the application.
-
ENDMILLS – STANDARD LENGTH SERIES 121 M.A.FORD
Solid Carbide TuffCut® GP 2 Flute End MillDesigned for general purpose milling of most materials- • 2 Flute
- • Solid carbide
- • Uncoated or available with TiN, Altima® and TiCN coating. T=TiN, A=ALtima® (ALTiN), C=TiCN coated
- • Micro decimal sizes .005″-.100″ and 0.2mm-2.0mm
- • Center cutting
- • Standard flute lengths
- • 30° Helix angle
- • For roughing and finishing applications
- • Square end and corner radius options
- • Material Applications: Steels, Hardened Steels, Stainless Steels, Cast Iron, Special and High Temp Alloys, Non-Ferrous
-
QSP-MH Ratchet Head Type Preset Torque Wrench with Metal Handle ประแจขันปอนด์ | TOHNICHI
QSP-MH Ratchet Head Type Preset Torque Wrench with Metal Handle TOHNICHI
ASSEMBLY | PRESET | RATCHET HEAD | ISO6789.2003, 2017
● No external scale, torque set by a torque wrench tester
● Ideal for mass production application
