- Sort by Popularity
- Display 12 Products per page
-
500-776 | SuperCaliper SERIES 500 – NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER | MITUTOYO
SuperCaliper SERIES 500
NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER
Brand : MITUTOYO
Order No. : 500-776
Range : 0-150 mm
Description :
This IP67 solar-powered digimatic SuperCaliper with ABSOLUTE system is a robust, high performance model and offers you the following benefits:
- Waterproof reliability
- Impact resistance of the display unit for improved usability in workshop conditions
- It operates in only 60 lux ambient lighting.
- Even if the illumination is temporarily less than 60 lux measuring can be performed by charging a super capacitor.
- Excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid
-
329-250-30 | DEPTH MICROMETER SERIES 329 – INTERCHANGEABLE ROD TYPE, 0-150 mm | MITUTOYO
DEPTH MICROMETER SERIES 329
INTERCHANGEABLE ROD TYPE
Order No. : 329-250-30
Range : 0-150 mm
Description :
This interchangeable rod type micrometer can be used for wide range measurements.
It offers you the following benefits:- ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement
- The ratchet stop provides constant measuring force.
- Measuring rod lock.
-
EPDS2-SD | EPOCH SD(S-DLC) DEEP SQUARE – END MILLS | MOLDINO
EPOCH SD(S-DLC) DEEP SQUARE
ดอกเอ็นมิลล์
High welding resistance makes it ideal for machining aluminum alloys and copper. DLC coating.
**กรณีต้องการใบเสนอราคา กรุณาระบุขนาดที่ลูกค้าต้องการเพื่อความรวดเร็วในการจัดทำใบเสนอราคา**
-
QSPK – Pre-set, ratchet torque wrench, Metal handle : ประแจปอนด์แบบปรับตั้งแรงขันตายตัว หัวฟรีซ้าย-ขวา BESTOOL-KANON
ประแจปอนด์แบบปรับตั้งแรงขันตายตัว หัวฟรีซ้าย-ขวา
QSPK PRE-SET, RATCHET TORQUE WRENCHES, METAL HANDLE
Pre-set torque value. Improved work efficiency with ratchet square drive.FEATURES
● The ratchet drive enabkes quickly tightening fasteners to the preset torque. Suitable for repetitive jobs.
● The wrench’s inner mechanism automatically resets itself for the next job after disenganging from a tightened joint.
● Accuracy : ±3% of pre-set value. -
523-121 | Dial Snap Meter Series 510, 0-25 mm | MITUYOYO
Dial Snap Meter Series 510
Range : 0-25 mm
Order No. : 523-121
• Suitable for quick pass / fail inspection of mass-produced components.
• Greatly improved accuracy: indication accuracy and graduation of 1 μm.
• IP protection level: 54, coolant-splash resistant during grinding process.
• Hard-coated crystal: enhanced oil and scratch resistance. -
107-203 | Indicator Type Micrometer Series 107, 50-75 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 50-75 mm
Order No. : 107-203
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
147-202 | Can Seam Micrometers Series 147 – ไมโครมิเตอร์วัดกระป๋อง | MITUTOYO
Can Seam Micrometers Series 147
ไมโครมิเตอร์วัดกระป๋อง
Order No. : 147-202
Range 0-13 mm
• Measures the width, height, and depth of can seams.
-
122-109-10 | Blade Micrometer – non rotating spindle type – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type – Series 122
Range: 200-225 mm
Order No.: 122-109-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
105-413 | Outside Micrometer with Anvil Extension Collars 1500-1600 mm | MITUTOYO
Order No. 105-413
Outside Micrometer with Anvil Extension Collars
Range : 1500-1600 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.
