- Sort by Popularity
- Display 12 Products per page
-
611654-021 | Individual Metric Rectangular Gauge Blocks – 14.5mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 14.5mm | Mitutoyo
Order No. : 611654-021
Length : 14.5 mm
Description :
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
-
611675 | Individual Metric Rectangular Gauge Blocks – 50mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 50mm | Mitutoyo
Order No. : 611675
Length : 50 mm
Description :
• If using only one length repeatedly, it is suggested to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry. -
611845 | Individual Metric Rectangular Gauge Blocks – 1000mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 1000mm | Mitutoyo
Order No. : 611845
Length : 1000 mm
Description :
• If using only one length repeatedly, it is suggested to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry. -
IMT-60R (011160) | TELESCOPING INSPECTION MIRROR | SK NIIGATA SEIKI
TELESCOPING INSPECTION MIRROR
Suitable for inspection of hard-to-see locations
USE
● Inspection of hard-to-see locationsMATERIAL
● Body: Brass
(IMT-60LR, IMT-80LK: Stainless steel)
● Mirror: GlassFEATURES
● Extendable reach and easy to carry
● Replacement mirror also sold separately
●With mirror protective film -
368-002 | Holtest – Two Point Internal Micrometer Holtest 2.5-3 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-002
Range. 2.5-3mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
506-207 | VERNIER HEIGHT GAGE SERIES 506 – STANDARD HEIGHT GAGE WITH ADJUSTABLE MAIN SCALE, 0-200mm | MITUTOYO
VERNIER HEIGHT GAGE SERIES 506
STANDARD HEIGHT GAGE WITH ADJUSTABLE MAIN SCALE
Order No. 506-207
Range : 0 – 200mm
Description :
This vernier height gauge offers you the following benefits:
- You can take accurate and fast readings thanks to the satin chrome finished main and vernier scales.
- A carbide-tipped scriber is provided.