เครื่องมืออุตสาหกรรม

FIXTURE FOR MICROMETER HEAD | MITUTOYO

Order No. : 303560

Description :

Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:

• These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
• Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER

Order No. : 468-165

Range : 16-20 mm

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO

Order No. : 468-277

Range : 7-8″

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

3-POINT INTERNAL MICROMETER HOLTEST  | MITUTOYO

Order No. 368-164

Range. 12-16 mm

Description

• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range.

3-POINT INTERNAL MICROMETER HOLTEST (TYPE II) MITUTOYO

Order No. : 368-770

Range: 50-63mm

Description

• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).

ABSOLUTE BOREMATIC SERIES 568

ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES

Range : 0.35-0.425″

Order No. : 568-462

Description :

• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).

TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE

Order No. : 133-144

Range : 75-100mm

Description :

• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment.

TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE

Order No. : 133-175

Range : 850-875mm

Description :

• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment.

TUBULAR INSIDE MICROMETER SERIES 140 – EXTENSION PIPE TYPE

Order No.: 140-157

Range : 1000-2000mm

Description :

• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.

INSIDE MICRO CHECKER SERIES 515

เครื่องมือตรวจสอบไมโครมิเตอร์วัดใน

Order No. 515-585

Range: 25-300 mm

Description:

• The Inside Micro Checker is designed to act as a setting standard for inside micrometers.
• Applicable for SERIES 133, 139 and 145 (over 50 mm). Not applicable for SERIES 137, 141, 337 and 339.

BORE GAGE SERIES 511

Order No.: 511-703

Range: 50-150 mm

Description:

• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request.

BORE GAGE SERIES 511 – WITH MICROMETER HEAD

Order No.: 511-806

Range: 250-400 mm

Description: