- Sort by Popularity
- Display 12 Products per page
-
IMT-60R (011160) | TELESCOPING INSPECTION MIRROR | SK NIIGATA SEIKI
TELESCOPING INSPECTION MIRROR
Suitable for inspection of hard-to-see locations
USE
● Inspection of hard-to-see locationsMATERIAL
● Body: Brass
(IMT-60LR, IMT-80LK: Stainless steel)
● Mirror: GlassFEATURES
● Extendable reach and easy to carry
● Replacement mirror also sold separately
●With mirror protective film -
368-002 | Holtest – Two Point Internal Micrometer Holtest 2.5-3 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-002
Range. 2.5-3mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
506-207 | VERNIER HEIGHT GAGE SERIES 506 – STANDARD HEIGHT GAGE WITH ADJUSTABLE MAIN SCALE, 0-200mm | MITUTOYO
VERNIER HEIGHT GAGE SERIES 506
STANDARD HEIGHT GAGE WITH ADJUSTABLE MAIN SCALE
Order No. 506-207
Range : 0 – 200mm
Description :
This vernier height gauge offers you the following benefits:
- You can take accurate and fast readings thanks to the satin chrome finished main and vernier scales.
- A carbide-tipped scriber is provided.
-
QLK | ADJUSTABLE, RATCHET TORQUE WRENCHSประแจปอนด์แบบปรับตั้งแรงขัน หัวฟรีซ้าย-ขวา BESTOOL-KANON
ประแจปอนด์แบบปรับตั้งแรงขัน หัวฟรีซ้าย-ขวา
QLK | ADJUSTABLE, RATCHET TORQUE WRENCHSFreely set torque values within the capacity range. Replaceable socket, ratchet wrenches.
FEATURES
● The ratchet improves efficiency. These wrenches are well suited forepetitive work.
● By replacing the sockets, various sizes of fasteners can be tightened within the tool’s capacity range.
● By reversing the ratchet, the wrench can be used to loosen fasteners counter-clockwise.
● Tightening to a torque setting can only be done clockwise.
● Accuracy : ±3% of indicated value over the full range.ADJUSTABLE THE TORQUE SETTING
♦ 30QLK~5600QLK
(1) Lossen the lock screw. (See Fig.1)
(2) Turn the sub-scale and adjust to a torque value
(the main scale plus the sub-scale) (See Fig.2)
(3) Tighten the lock screw.
(If the lock screw hits the pin before completely tightening, then change the position of the pin)
♦ 7000QLK~21000QLK-8
(1) When applicable, mount the extension bar snugly all the way onto the body of the wrench.
(2) With the extension bar mounted (See Fig.3), insert the hexagonal side of the adjusting box wrench.
● Without the extension bar (See Fig.4), insert the hexagonal side of the adjusting box wrench into the body.
(3) Turn the adjusting box wrench to set the torque value. (the main scale plus the sub-scale) -
107-202 | Indicator Type Micrometer Series 107, 25-50 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 25-50 mm
Order No. : 107-202
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer.