- Sort by Popularity
- Display 12 Products per page
-
111-119 | Spline Micrometer, 100-125 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-119
Range. : 100-125 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
112-168 | Point Micrometer with Carbide Tip – Series 112, 75-100 mm | MITUTOYO
POINT MICROMETER with Carbide tip – SERIES 112
Order No. : 112-168
Range : 75-100 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
155-131 | Telescoping Gage – Series 155 | MITUTOYO
TELESCOPIC GAGE – SERIES 155
Order No. 155-131
• A spring-loaded plunger expands within a bore (or groove) and is locked in place allowing measurement of diameter (or width) with an outside micrometer after extraction.
-
167-129 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-129
Length : 725 mm
-
167-386 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-386
Length : 1550 mm
-
167-275 | Setting Standard for Screw Thread Micrometer – Series 167 | MITUTOYO
SETTING STANDARD FOR SCREW THREAD MICROMETER – SERIES 167
Used for accurately setting screw thread micrometers at the start or end of the measuring range.
Whitworth θ = 55°
Order No. 167-275
-
350-382-30 | Digimatic Micrometer Head – Series 350 | MITUTOYO
DIGIMATIC MICROMETER HEAD – SERIES 350
Order no. 350-382-30
Stroke: 1″
Description :
• Equipped with digital display and output.
• 350-28X-30, 350-261-30, 350-38X-30 and 350-361-30 are protection grade IP65, water-proof Digimatic micrometer heads.
• Digimatic models can be easily integrated into statistical process control and measurement systems. -
148-822-10 | Micrometer Heads – Small Standard Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – SMALL STANDARD TYPE – SERIES 148
Order no. 148-822-10
Range: 0-13mm
Description :
This is a standard, small-sized micrometer head which offers you the following benefits:
- Plain stem and a flat or spherical spindle end
- Hardened steel measuring surface
-
151-221 | Micrometer Heads – Medium-size standard Type with 8mm Diameter Spindle – SERIES 151 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE
With 8mm Diameter Spindle – SERIES 151
MITUTOYO
Order no. 151-221
Range: 0-25mm
Description :
• Larger spindle (ø8 mm) for heavy-duty applications (normally ø6.35 mm).
-
148-242-10 | Micrometer Heads – Fine Spindle Feed of 0.1mm/rev – SERIES 148 | MITUTOYO
MICROMETER HEAD – FINE SPINDLE FEED OF 0.1mm/rev – SERIES 148
MITUTOYO
Order no. 148-242-10
Range: 0-6.5mm
Description :
- Highly accurate 0.1 mm pitch thread is only one-fifth of that used for a standard-pitch head (0.5 mm).
- External dimensions are compatible with standard 0.5 mm pitch heads.
-
303572 | Fixture for Micrometer Head | MITUTOYO
FIXTURE FOR MICROMETER HEAD | MITUTOYO
Order No. : 303572
Description :
Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:
- These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
- Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.
-
468-177 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-177
Range : 175-200 mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.
