- Sort by Popularity
- Display 12 Products per page
-
293-587 | Digimatic Outside Micrometer Series 293, 425-450 mm | MITUTOYO
Digimatic Outside Micrometer Series 293
Range : 425-450 mm
Order No. 293-587
• Constant measuring force: ratchet stop
• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as
Excel.
• Measuring faces: Carbide. -
103-129 | Outside Micrometer Series 103, 0-25mm, 0.001mm | Mitutoyo
Outside Micrometer Series 103
Range 0 – 25 mm
Graduation 0.001 mm
Order No. 103-129
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
103-171 | Outside Micrometer Series 103, 850-875 mm | Mitutoyo
Outside Micrometer Series 103
Range 850-875 mm
Graduation 0.01 mm
Order No. 103-171
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
107-208 | Indicator Type Micrometer Series 107, 175-200 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 175-200 mm
Order No. : 107-208
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
146-231 | Groove Micrometers -Non-Rotating Spindle Series 146 – 0-1″, 0.25″ Flange | MITUTOYO
Groove Micrometers – Non-Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-231
Flange : 0.25 mm
-
422-411-20 | Blade Micrometer – QuickMike, IP65 – Series 422 | Mitutoyo
Blade Micrometer – non rotating spindle type – Series 422 (QuickMike – IP65)
Range: 0-30 mm
Order No.: 422-411-20
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
340-723 | Outside Micrometer with Interchangeable Anvils, 30-36″ | MITUTOYO
340-723
Outside Micrometer with Interchangeable Anvils | 30-36″
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
343-252-30 | Caliper Type Micrometers Series 343, 50-75 mm | MITUTOYO
Caliper Type Micrometers Series 343
Order No. 343-252-30
Range : 50-75 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
125-120 | Screw Thread Micrometer, 75-100 mm, 5.5-7 mm / 4.5-3.5 TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-120
Range : 75-100 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
123-107 | Disk Micrometer – Hardened Steel Disk Series 123, 150-175 mm, Disk=30 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-107
Range : 150-175 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
227-221-20 | Absolute Disk Micrometer, Adjustable measuring force (LCD)- QuickMike, IP65 – 0-15mm | MITUTOYO
ABSOLUTE Disk Micrometer, Adjustable measuring force (LCD) – IP65, QuickMike
Order No. : 227-221-20
Range : 0-15 mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module (series 227: 0.4 to 3 module).
• Equipped with Ratchet Stop for constant measuring force. -
395-351-30 | Tube Micrometer, Inch/Metric, 0-1″ | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-351-30
Range : 0-1″
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force.
