- Sort by Popularity
- Display 12 Products per page
-
326-251-30 | Screw Thread Micrometer- Interchangeable Anvil/Spindle Tip Type 0-25 mm | MITUTOYO
Screw Thread Micrometers
Order No. 326-251-30
Range : 0-25 mm
• Use by installing a suitable interchangeable anvil/spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65,waterproof Digimatic screw thread micrometer with interchangeable anvil/spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils/spindle tips are optional. -
293-181-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed Inch/Metric, 1-2″ | MITUTOYO
Digital Micrometer QuantuMike IP65
Inch/Metric, 1-2″• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-333-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Inch / Metric
Range : 3-4″ mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-588 | Digimatic Outside Micrometer Series 293, 450-475 mm | MITUTOYO
Digimatic Outside Micrometer Series 293
Range : 450-475 mm
Order No. 293-588
• Constant measuring force: ratchet stop
• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as
Excel.
• Measuring faces: Carbide. -
103-130 | Outside Micrometer Series 103, 25-50 mm, 0.001mm | Mitutoyo
Outside Micrometer Series 103
Range 25 – 50 mm
Graduation 0.001 mm
Order No. 103-130
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
103-172 | Outside Micrometer Series 103, 875-900 mm | Mitutoyo
Outside Micrometer Series 103
Range 875-900 mm
Graduation 0.01 mm
Order No. 103-172
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
406-252-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 50-75 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 50-75 mm
Resolution : 0.001 mm
Order No. : 406-252-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
146-232 | Groove Micrometers -Non-Rotating Spindle Series 146 – 0-1″, 0.5″ Flange | MITUTOYO
Groove Micrometers – Non-Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-232
Flange : 0.5 mm
-
422-412-20 | Blade Micrometer – QuickMike, IP65 – Series 422 | Mitutoyo
Blade Micrometer – non rotating spindle type – Series 422 (QuickMike – IP65)
Range: 25-55 mm
Order No.: 422-412-20
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
104-171 | Outside Micrometer with Interchangeable Anvils, 0-50 mm | MITUTOYO
104-171
Outside Micrometer with Interchangeable Anvils | 0 – 50 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force. -
343-253-30 | Caliper Type Micrometers Series 343, 75-100 mm | MITUTOYO
Caliper Type Micrometers Series 343
Order No. 343-253-30
Range : 75-100 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
326-254-30 | Digital Screw Thread Micrometer IP65 Interchangeable Anvil/Spindle Tip Type 75-100 mm | MITUTOYO
Digital Screw Thread Micrometer IP65
Order No. 326-254-30
Range : 75-100 mm
• Use by installing a suitable interchangeable anvil/spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65,waterproof Digimatic screw thread micrometer with interchangeable anvil/spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils/spindle tips are optional.
