- Sort by Popularity
- Display 12 Products per page
-
511-726-20 | BORE GAGE SERIES 511, 250-400mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-726
Range: 250-400 mm
Description:
• Longer plunger stroke with no effect on accuracy.
• Carbide is used for the contact point ensuring high durability and wear resistance.
• This model reduces the influence of heat from the operator’s hand by 50% by increasing the grip size and making the grip hollow-structured, thereby retaining high-accuracy measurement.
• The indicator (dial indicator, Digimatic indicator) and dial protection cover are optional. Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.
• Optional Extension Rods can be attached for measuring deep holes.
• A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage before making a measurement. -
511-416 | BORE GAGES SERRIES 511 – for BLIND HOLES, 35-60mm | MITUTOYO
BORE GAGE SERIES 511 FOR BLIND HOLES
Order No.: 511-416
Range: 35-60mm
Description :
• Capable of ID (inside diameter) measurement close to the bottom of a hole.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• Optional Extension Rods can be attached for measuring deep holes. -
177-279 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-279
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
177-423 | SETTING RINGS SERIES 177 – CERA | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-423
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
516-342 | Rectangular Gauge Block Sets : SERIES 516 | MITUTOYO
Rectangular Gauge Block Sets : SERIES 516
Order No. : 516-342
• Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required
by the target applications, the level of convenience desired and the environmental conditions in which they will be used. -
516-381 | Rectangular Gauge Block Sets (0.001 mm Step Block Sets)-Ceramic : SERIES 516 | MITUTOYO
Rectangular Gauge Block Sets – Ceramic : SERIES 516
0.001 mm Step Block Sets
Order No. : 516-381
• Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required
by the target applications, the level of convenience desired and the environmental conditions in which they will be used. -
611803 | Gauge Blocks with a Calibrated Coefficient of Thermal Expansion – 150mm | Mitutoyo
Gauge Blocks with a Calibrated Coefficient of Thermal Expansion – 150mm | Mitutoyo
Order No. : 611803
Length : 150 mm
Description :
• Mitutoyo offers top-quality gauge blocks (steel and ceramic), superior to K class blocks due to their advanced manufacturing technologies.
• Features an accurately calibrated thermal expansion coefficient measured with a proprietary double-faced interferometer (DFI). Each gauge block is calibrated for length on a highly accurate gauge block interferometer (GBI) system.
• Available as rectangular gauge blocks in the range 100 to 500 mm. -
169-101-10 | Paper Thickness Micrometer – Series 169 -Non Rotating Spindle Type, 0-25 mm | MITUTOYO
Paper Thickness Micrometer – Series 169 -Non Rotating Spindle Type
ไมโครมิเตอร์วัดกระดาษ
Order No. 169-101-10
Rnage : 0-25 mm
• For paper thickness measurement.
• Non-rotating spindle.
• Anvil diameter 14.3 mm (without recess)
• Equipped with Ratchet Stop for constant measuring force. (8.02±0.8 N) -
02AZD790D | U-WAVE-T CONNECTION CABLE D FLAT 10-PIN TYPE | MITUTOYO
U-WAVE-T CONNECTION CABLE D FLAT 10-PIN TYPE
Description
- This connecting part connects a measuring tool to its U-WAVE T unit. Choose the appropriate cable for your measuring tool from the seven types below, A to G.
-
293-242-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 50-75mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-666-20 | Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293, 0-30 mm | MITUTOYO
Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293
Order No. 293-666-20
Range : 0 – 30 mm• The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation which enables widely differently sized features to be measured quickly.
• Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error.
• Measuring faces: Carbide.
• Supplied with a Ratchet Stop for constant measuring force. -
102-302 | Outside Micrometers Series 102, 25-50 mm, 0.01 mm | MITUTOYO
Outside Micrometers Series 102,
Range : 25-50 mm
Graduation : 0.01 mm
Order No. : 102-302• Heat-insulated frame.
• Cut-away frame (behind anvil) for measuring in hard-to-reach places.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.
• In addition to standard specification, a non-rotating spindle type tooth thickness micrometer is also available.
