- Sort by Popularity
- Display 12 Products per page
-
115-218 | Tube Micrometer – Spherical Anvil and Spindle Type, 75-100mm | MITUTOYO
TUBE MICROMETER – Spherical Anvil and Spindle Type – SERIES 115
Order No. 115-218
Range : 75-100 mm
• Measuring faces: Carbide.
(115-201: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
331-364-30 | Spline Micrometer, 3-4″ | MITUTOYO
SPLINE MICROMETER SERIES 331
Order No. 331-364-30
Range. : 3-4″
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• IP65 water / dust protection.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
112-201 | Point Micrometer – Series 112, 0-25 mm | MITUTOYO
POINT MICROMETER – SERIES 112
Order No. : 112-201
Range : 0-25 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
114-122 | V-Anvil Micrometer – 5 Flute, 25-45 mm | MITUTOYO
V-ANVIL MICROMETER – 5 FLUTE
Order No. : 114-122
Range : 25-45 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
167-121 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-121
Length : 525 mm
-
148-207-10 | Micrometer Heads – Ultra-small Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – ULTRA-SMALL – SERIES 148
Clamp Nut, Spherical Spindle
Order no. 148-207-10
Range: 0-6.5mm
Description :
• Miniature micrometer heads for ease of incorporating into machines.
-
149-801-10 | Micrometer Heads – Small Standard Type with Carbide-Tipped Spindle – SERIES 149 | MITUTOYO
MICROMETER HEAD – SMALL STANDARD TYPE WITH CARBIDE-TIPPED SPINDLE – SERIES 149
Order no. 149-801-10
Range: 0-15mm
Description :
• Carbide-tipped spindle provides high abrasion resistance.
-
153-203 | Micrometer Heads – Non-rotating Spindle Type – SERIES 153 | MITUTOYO
MICROMETER HEAD – NON-ROTATING SPINDLE – SERIES 153
MITUTOYO
Order no. 153-203
Range: 0-25mm
Description :
- Micrometer Head featuring a non-rotating spindle for delicate workpieces
- Design suits applications where the twisting effect of the standard spindle is undesirable because of the risk of damage
-
04AZA163 | Precision Leadscrew – 13mm Stroke | MITUTOYO
PRECISION LEADSCREW | MITUTOYO
Order No. : 04AZA163
Range : 0-13 mm
Description :
- Mitutoyo manufacture simple and less expensive precision leadscrews for precise positioning mechanisms and fine-feed mechanisms, in addition to standard micrometer heads..
- Mitutoyo also manufacture leadscrews with special specifications, such as 0.25 mm pitch, as well as those with the standard 0.5 mm feed pitch and with dimensions and forms that meet customer requirements.
-
468-270 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-270
Range : 2-2.5″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-001 | Holtest – Two Point Internal Micrometer Holtest 2-2.5 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-001
Range. 2-2.5mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
368-764 | Holtest (Type II) – 3 Point Internal Micrometer 12-16mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST (TYPE II) MITUTOYO
Order No. : 368-764
Range: 12-16mm
Description
• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).
