- Sort by Popularity
- Display 24 Products per page
-
111-117 | Spline Micrometer, 50-75 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-117
Range. : 50-75 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
112-165 | Point Micrometer with Carbide Tip – Series 112, 0-25 mm | MITUTOYO
POINT MICROMETER with Carbide tip – SERIES 112
Order No. : 112-165
Range : 0-25 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
114-165 | V-Anvil Micrometer – 5 Flute, 5-25 mm | MITUTOYO
V-ANVIL MICROMETER – 5 FLUTE
Order No. : 114-165
Range : 5-25 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
167-124 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-124
Length : 600 mm
-
148-301-10 | Micrometer Heads – Short Thimble with Choice of Diameter – SERIES 148 | MITUTOYO
MICROMETER HEAD – SHORT THIMBLE WITH CHOICE OF DIAMETER – SERIES 148
Order no. 148-301-10
Range: 0-6.5mm
Description :
• Short body design maintains measuring range for limited space applications.
• Available in three thimble diameters to provide ease-of-reading options.
-
149-822-10 | Micrometer Heads – Small Standard Type with Carbide-Tipped Spindle – SERIES 149 | MITUTOYO
MICROMETER HEAD – SMALL STANDARD TYPE WITH CARBIDE-TIPPED SPINDLE – SERIES 149
Order no. 149-822-10
Range: 0-15mm
Description :
• Carbide-tipped spindle provides high abrasion resistance.
-
152-102 | Micrometer Heads – Quick Spindle Feed of 1mm/rev – SERIES 152 | MITUTOYO
MICROMETER HEAD – QUICK SPINDLE FEED OF 1mm/rev – SERIES 152
MITUTOYO
Order no. 152-102
Range: 0-25mm
Description :
- Micrometer head with 1 mm spindle pitch enables quick feeding and positioning.
- The larger screw thread also provides greater load-bearing capacity than a standard head.
-
468-162 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER
Order No. : 468-162
Range : 8-10 mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance. -
468-273 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-273
Range : 3.5-4″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-005 | Holtest – Two Point Internal Micrometer Holtest 5-6mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-005
Range. 5-6 mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
368-767 | Holtest (Type II) – 3 Point Internal Micrometer 25-30mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST (TYPE II) MITUTOYO
Order No. : 368-767
Range: 25-30mm
Description
• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
568-375 | ABSOLUTE BOREMATIC SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES 112-125mm | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES
Range : 112-125mm
Order No. : 568-375
Description :
• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).
