- Sort by Price
- Display 12 Products per page
-
340-251-30 | Outside Micrometer with Interchangeable Anvils, 0-150 mm | MITUTOYO
340-251-30
Outside Micrometer with Interchangeable Anvils | 0-150 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
368-002 | Holtest – Two Point Internal Micrometer Holtest 2.5-3 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-002
Range. 2.5-3mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
395-251-30 | Tube Micrometer, 0-25mm | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-251-30
Range : 0-25mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
515-322 | HEIGHT MASTER Series 515 | MITUTOYO
• For calibrating and setting height gages.
• Staggered arrangement of block stack have two measuring faces on the same level, one facing up and the other down
-
113-103 | Limit Micrometer Series 113, 25-50 mm | Mitutoyo
Limit Micrometer : Series 113
Range : 25-50 mm
Order No. 113-103
• Dual-spindle design enables use as a GO/±NG gage by setting upper and lower limits.
• Measuring faces: Carbide. -
105-103 | Outside Micrometer with Anvil Extension Collars 500-600 mm | MITUTOYO
Order No. 105-103
Outside Micrometer with Anvil Extension Collars
Range : 500-600 mm
MITUTOYO
• Adjustable measuring range with extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
345-250-30 | INSIDE MICROMETER SERIES 345 – CALIPER TYPE, 5-30mm | MITUTOYO
INSIDE MICROMETER SERIES 345 – CALIPER TYPE
Order No. 345-250-30
Range: 5-30 mm
Description:
• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
395-271-30 | Tube Micrometer – Spherical Anvil and Spindle Type, 0-25mm | MITUTOYO
TUBE MICROMETER – Spherical Anvil and Spindle Type – SERIES 395
Order No. 395-271-30
Range : 0-25 mm
• Measuring faces: Carbide.
(115-201: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
515-520 | UNIVERSAL HEIGHT MASTER Series 515 – Usable in Vertical and Horizontal Orientations | MITUTOYO
• The Universal Height Master is designed for both vertical and horizontal orientation, providing a wide range of applications such as accuracy checking of machine tool table movements.
• Analog display by the built-in counter – the appearance and specifications are the same as 515-322.
-
510-121 | Indicating Micrometer – Series 510, 0-25 mm | MITUTOYO
Indicating Micrometer – Series 510
Order No. 510-121
Range : 0 -25 mm
• Suitable for pass / fail judgement of mass-produced components.
• Easy to use when operating one-handed due to retractable anvil.
• In the 25 mm measuring range, the model lineup offers a choice of left or right positioning of the anvil-retraction button.
• Greatly improved accuracy: indication error and graduation of 1 μm.
• IP protection level: 54, coolant-splash resistant during grinding process. -
193-102 | Digit outside Micrometer Series 193, 25-50 mm | MITUTOYO
Digit Outside Micrometer Series 193
Range : 25-50 mm
Order No. : 193-102
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
105-408 | Outside Micrometer with Anvil Extension Collars 1000-1100 mm | MITUTOYO
Order No. 105-408
Outside Micrometer with Anvil Extension Collars
Range : 1000-1100 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.
