- Sort by Popularity
- Display 12 Products per page
-
511-769-20 | BORE GAGE SERIES 511 – SHORT LEG TYPE, 100-160mm | MITUTOYO
BORE GAGE SERIES 511 – SHORT LEG TYPE
Order No.: 511-769-20
Range: 100-160 mm
Description:
• As it is light and easy to handle with a short rod below the grip, the operator can work smoothly when inserting it into a narrow space or measuring an object on the table.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
953552 | EXTENSION ROD SERIES 511 – ACCESSORIES FOR BORE GAGE | MITUTOYO
EXTENSION ROD SERIES 511 – ACCESSORIES FOR BORE GAGE | MITUTOYO
Order No. 953552
Description
• Extension Rods enable measurement of deeper holes when attached to a bore gage.
Note 1: When using an extension rod that is 500 mm or longer, hold the bore gage upright during measurement.
Note 2: Only one extension rod can be attached to a bore gage. It is not possible to use more than one extension rod.
Note 3: The extension rod cannot be used for products with a custom size or custom specifications.
-
177-279 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-279
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
177-423 | SETTING RINGS SERIES 177 – CERA | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-423
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
516-991 | Rectangular Gauge Block Sets (Thin Block Sets) : SERIES 516 | MITUTOYO
Rectangular Gauge Block Sets : SERIES 516
Thin Block sets
Order No. : 516-991
• Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required
by the target applications, the level of convenience desired and the environmental conditions in which they will be used. -
516-734 | Rectangular Gauge Block Sets (Long Block Sets)-Ceramic : SERIES 516 | MITUTOYO
Rectangular Gauge Block Sets – Ceramic : SERIES 516
Long Block Sets
Order No. : 516-734
• Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required
by the target applications, the level of convenience desired and the environmental conditions in which they will be used. -
614611 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614611
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
614582 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614582
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
614612 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614612
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
614628 | Individual Metric Square Gauge Blocks | MITUTOYO
Individual Metric Square Gauge Blocks
Order No. 614628
Description :
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the Suffix No. representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• It is recommended to use only Mitutoyo accessory sets with these gauge blocks as the tolerances on the assembly hole countersinks in the blocks and mating screw heads in the sets are 5 times tighter than the applicable standard, and therefore are guaranteed to fit together correctly. -
STEEL PIN GAUGE SET – AA SERIES | SK NIIGATA SEIKI
STEEL PIN GAUGE SET – AA SERIES | SK NIIGATA SEIKI
The most standard and popular type pin gauge. Available
SUB-ZERO（Cryogenic hardened）TREATMENT
※ 2,700mm or over●The most popular type
●Individual pin gauges are also available（plastic case included）
●Custom made Pin Gauges are available on request
●Aluminum Pin Vise is included with AA-0A to AA-9B.
Pin Vise is included with AA-0E to AA-6F.
●For above 1.000mm, nominal size is marked on gauge
●Provide with individual pin gauge standNominal Size Step Length Tolerance Out of Diameter Hardness (mm) (mm) (mm) (μm) Roundness (μm) Inequality (μm) (HV) 0.05 0.01 step 5 ±0.5 0.5 1.0 More than 720 0.06 … 0.09 0.01 step 10 ±0.5 0.5 1.0 More than 720 0.10 … 0.19 0.01 step 40 ±0.8 0.5 1.0 More than 720 0.200… 0.999 0.001step 40 ±0.8 0.5 1.0 More than 720 1.000… 2.699 0.001step 50 ±0.8 0.5 1.0 More than 720 2.700…10.000 0.001step 50 ±0.8 0.5 1.0 More than 650 10.01 …20.00 0.01 step 50 ±1.5 0.8 1.6 More than 650 20.01 …30.00 0.01 step 50 ±2 1.6 3.2 More than 650 30.01 …41.00 - 50 ±3 3 6 More than 650 ※ 5mm from each edge is not precision guaranteed ※ 30.01 〜 41.00 are custom made
Pin gauges are slightly chamfered on both edge at the following level;
Ø 1mm…Approx. 0.03mm Ø 3mm…Approx. 0.1mm Ø 5mm…Approx. 0.2mm
Ø 7mm…Approx. 0.25mm Ø 10mm…Approx. 0.3mmAA series (0.010mm step)
Model No. Nominal Size (mm) Pins per set Aluminum Pin Vise Weight
(Including case)AA-00 0.06 • 0.07 • 0.08 ⋯⋯ 0.290 27 - 0.90kg AA-0A 0.200 • 0.210 • 0.220 ⋯⋯ 0.500 31 APV-0A 0.95kg AA-0B 0.500 • 0.510 • 0.520 ⋯⋯ 1.000 51 APV-0B 1.02kg AA-1A 1.000 • 1.010 • 1.020 ⋯⋯ 1.500 51 APV-1A 1.03kg AA-1B 1.500 • 1.510 • 1.520 ⋯⋯ 2.000 51 APV-1B 1.06kg AA-2A 2.000 • 2.010 • 2.020 ⋯⋯ 2.500 51 APV-2A 1.09kg AA-2B 2.500 • 2.510 • 2.520 ⋯⋯ 3.000 51 APV-2B 1.13kg AA-3A 3.000 • 3.01. • 3.020 ⋯⋯ 3.500 51 APV-3A 1.18kg AA-3B 3.500 • 3.510 • 3.520 ⋯⋯ 4.000 51 APV-3B 1.23kg AA-4A 4.000 • 4.010 • 4.020 ⋯⋯ 4.500 51 APV-4A 1.29kg AA-4B 4.500 • 4.510 • 4.520 ⋯⋯ 5.000 51 APV-4B 1.37kg AA-5A 5.000 • 5.010 • 5.020 ⋯⋯ 5.500 51 APV-5A 1.44kg AA-5B 5.500 • 5.510 • 5.520 ⋯⋯ 6.000 51 APV-5B 1.53kg AA-6A 6.000 • 6.010 • 6.020 ⋯⋯ 6.500 51 APV-6A 1.63kg AA-6B 6.500 • 6.510 • 6.520 ⋯⋯ 7.000 51 APV-6B 1.73kg AA-7A 7.000 • 7.010 • 7.020 ⋯⋯ 7.500 51 APV-7A 2.33kg AA-7B 7.500 • 7.510 • 7.520 ⋯⋯ 8.000 51 APV-7B 2.45kg AA-8A 8.000 • 8.010 • 8.020 ⋯⋯ 8.500 51 APV-8A 2.58kg AA-8B 8.500 • 8.510 • 8.520 ⋯⋯ 9.000 51 APV-8B 2.71kg AA-9A 9.000 • 9.010 • 9.020 ⋯⋯ 9.500 51 APV-9A 2.85kg AA-9B 9.500 • 9.510 • 9.520 ⋯⋯ 10.000 51 APV-9B 3.00kg AA-10A 10.00 • 10.01 • 10.02 ⋯⋯ 10.50 51 - 3.12kg AA-10B 10.50 • 10.51 • 10.520 ⋯⋯ 11.00 51 - 3.29kg AA-11A 11.00 • 11.01 • 11.02 ⋯⋯ 11.50 51 - 3.46kg AA-11B 11.50 • 11.51 • 11.52 ⋯⋯ 12.00 51 - 3.64kg AA-12A 12.00 • 12.01 • 12.02 ⋯⋯ 12.50 51 - 3.83kg AA-12B 12.50 • 12.51 • 12.52 ⋯⋯ 13.00 51 - 4.03kg AA-13A 13.00 • 13.01 • 13.02 ⋯⋯ 13.50 51 - 4.24kg AA-13B 13.50 • 13.51 • 13.52 ⋯⋯ 14.00 51 - 4.45kg AA-14A 14.00 • 14.01 • 14.02 ⋯⋯ 14.50 51 - 4.67kg AA-14B 14.50 • 14.51 • 14.52 ⋯⋯ 15.00 51 - 4.90kg AA-15A 15.00 • 15.01 • 15.02 ⋯⋯ 15.50 51 - 5.14kg AA-15B 15.50 • 15.51 • 15.52 ⋯⋯ 16.00 51 - 5.38kg AA-16A 16.00 • 16.01 • 16.02 ⋯⋯ 16.50 51 - 5.79kg AA-16B 16.50 • 16.51 • 16.52 ⋯⋯ 17.00 51 - 6.05kg AA-17A 17.00 • 17.01 • 17.02 ⋯⋯ 17.50 51 - 6.32kg AA-17B 17.50 • 17.51 • 17.52 ⋯⋯ 18.00 51 - 6.60kg AA-18A 18.00 • 18.01 • 18.02 ⋯⋯ 18.50 51 - 6.88kg AA-18B 18.50 • 18.51 • 18.52 ⋯⋯ 19.00 51 - 7.18kg AA-19A 19.00 • 19.01 • 19.02 ⋯⋯ 19.50 51 - 7.48kg AA-19B 19.50 • 19.51 • 19.52 ⋯⋯ 20.00 51 - 7.78kg AA series (0.005mm step)
Model No. Nominal Size (mm) Pins per set Aluminum Pin Vise Weight
(Including case)AA-0E 0.500 • 0.505 • 0.510 ⋯⋯ 0.750 51 PV-0B 1.12kg AA-0F 0.750 • 0.755 • 0.760 ⋯⋯ 1.000 51 PV-0B 1.12kg AA-1C 1.000 • 1.005 • 1.010 ⋯⋯ 1.250 51 PV-1A 1.13kg AA-1D 1.250 • 1.255 • 1.260 ⋯⋯ 1.500 51 PV-1A 1.14kg AA-1E 1.500 • 1.505 • 1.510 ⋯⋯ 1.750 51 PV-1B 1.15kg AA-1F 1.750 • 1.755 • 1.760 ⋯⋯ 2.000 51 PV-1B 1.17kg AA-2C 2.000 • 2.005 • 2.010 ⋯⋯ 2.250 51 PV-2A 1.18kg AA-2D 2.250 • 2.255 • 2.260 ⋯⋯ 2.500 51 PV-2A 1.20kg AA-2E 2.500 • 2.505 • 2.510 ⋯⋯ 2.750 51 PV-2B 1.22kg AA-2F 2.750 • 2.755 • 2.760 ⋯⋯ 3.000 51 PV-2B 1.24kg AA-3C 3.000 • 3.005 • 3.010 ⋯⋯ 3.250 51 PV-3A 1.27kg AA-3D 3.250 • 3.255 • 3.260 ⋯⋯ 3.500 51 PV-3A 1.30kg AA-3E 3.500 • 3.505 • 3.510 ⋯⋯ 3.750 51 PV-3B 1.33kg AA-3F 3.750 • 3.755 • 3.760 ⋯⋯ 4.000 51 PV-3B 1.36kg AA-4C 4.000 • 4.005 • 4.010 ⋯⋯ 4.250 51 PV-4A 1.39kg AA-4D 4.250 • 4.255 • 4.260 ⋯⋯ 4.500 51 PV-4A 1.42kg AA-4E 4.500 • 4.505 • 4.510 ⋯⋯ 4.750 51 PV-4B 1.46kg AA-4F 4.750 • 4.755 • 4.760 ⋯⋯ 5.000 51 PV-4B 1.50kg AA-5C 5.000 • 5.005 • 5.010 ⋯⋯ 5.250 51 PV-5A 1.54kg AA-5D 5.250 • 5.255 • 5.260 ⋯⋯ 5.500 51 PV-5A 1.58kg AA-5E 5.500 • 5.505 • 5.510 ⋯⋯ 5.750 51 PV-5B 1.62kg AA-5F 5.750 • 5.755 • 5.760 ⋯⋯ 6.000 51 PV-5B 1.67kg AA-6C 6.000 • 6.005 • 6.010 ⋯⋯ 6.250 51 PV-6A 1.71kg AA-6D 6.250 • 6.255 • 6.260 ⋯⋯ 6.500 51 PV-6A 1.76kg AA-6E 6.500 • 6.505 • 6.510 ⋯⋯ 6.750 51 PV-6B 1.81kg AA-6F 6.750 • 6.755 • 6.760 ⋯⋯ 7.000 51 PV-6B 1.87kg AA-7C 7.000 • 7.005 • 7.010 ⋯⋯ 7.250 51 - 2.26kg AA-7D 7.250 • 7.255 • 7.260 ⋯⋯ 7.500 51 - 2.32kg AA-7E 7.500 • 7.505 • 7.510 ⋯⋯ 7.750 51 - 2.38kg AA-7F 7.750 • 7.755 • 7.760 ⋯⋯ 8.000 51 - 2.44kg AA-8C 8.000 • 8.005 • 8.010 ⋯⋯ 8.250 51 - 2.50kg AA-8D 8.250 • 8.255 • 8.260 ⋯⋯ 8.500 51 - 2.57kg AA-8E 8.500 • 8.505 • 8.510 ⋯⋯ 8.750 51 - 2.64kg AA-8F 8.750 • 8.755 • 8.760 ⋯⋯ 9.000 51 - 2.71kg AA-9C 9.000 • 9.005 • 9.010 ⋯⋯ 9.250 51 - 2.78kg AA-9D 9.250 • 9.255 • 9.260 ⋯⋯ 9.500 51 - 2.85kg AA-9E 9.500 • 9.505 • 9.510 ⋯⋯ 9.750 51 - 2.93kg AA-9F 9.750 • 9.755 • 9.760 ⋯⋯ 10.000 51 - 3.00kg -
150-804 | Micrometer Heads – Medium-size standard Type – SERIES 150 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE – SERIES 150
Order no. 150-804
Range: 0-25mm
Description :
• Measuring range of 25 mm.
