เครื่องมือวัดละเอียด

• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are considered top-grade length standards.

• Standard scales can be used as a traceable standard of length for calibrating measuring instruments.

BORE GAGE SERIES 511 – ABSOLUTE DIGIMATIC BORE GAGE, 45-100mm | MITUTOYO

Order No. : 511-501

Range: 45-100 mm

Description

• These ABSOLUTE Digimatic bore gages are exclusively designed for inside diameter measurement.
• ABS (ABSOLUTE) type bore gages are not subject to overspeed error.
• Up to four Extension Rods (optional) can be connected for measuring at the bottom of a hole 2 m deep.
• The display and grip can be rotated up to 320° and the display can be inclined up to 90°, so that it is easily readable from any direction.
• The minimum value holding function provides easy measurement of hole diameter.

Screw Thread Micrometer

Order No. 125-101

Range : 0-25 mm

• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads.

CONNECTION UNIT, U-WAVE FIT STANDARD TYPE

Description

• This connecting part connects a measuring tool to its U-WAVE T unit. Choose the appropriate cable for your measuring tool from the seven types below, A to G.

Digit Outside Micrometer Series 193

Range : 50-75 mm

Order No. : 193-113

• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.

Snap Meters – Series 523

Order No. 523-144

Range: 75-100 mm

Blade Micrometer – non rotating spindle type – Series 122

Range: 25-50 mm

Order No.: 122-102-10

• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force.

104-161A

Outside Micrometer with Interchangeable Anvils | 50-150 mm

MITUTOYO

• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• Equipped with Ratchet Stop for constant measuring force.

Caliper Type Micrometers Series 343

Order No. 343-351-30

Range : 1-2″

MITUTOYO

• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.

Screw Thread Micrometer

Order No. 125-120

Range : 75-100 mm

• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads.

Disk Micrometer – Hardened Steel Disks

Order No. 123-104

Range : 75-100 mm

• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range).

Disk Micrometer- IP65, QuickMike

Order No. : 369-412-20

Range : 25-55 mm

• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module (series 227: 0.4 to 3 module).
• Equipped with Ratchet Stop for constant measuring force.