- Sort by Popularity
- Display 12 Products per page
-
150-183 | Micrometer Heads – Medium-size standard Type – SERIES 150 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE – SERIES 150
Order no. 150-183
Range: 0-25mm
Description :
• Measuring range of 25 mm.
-
182-524-10 | WORKING STANDARD SCALES SERIES 182 | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are available in various types and sizes to suit to your application.
• Ideal for checking magnification accuracy of profile projectors and microscopes, and the table feeding accuracy of measuring equipment.
-
368-002 | Holtest – Two Point Internal Micrometer Holtest 2.5-3 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-002
Range. 2.5-3mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
395-251-30 | Tube Micrometer, 0-25mm | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-251-30
Range : 0-25mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
264-622 | U-WAVE FIT, IP67 TYPE WIRELESS TRANSMITTER FOR MICROMETER | MITUTOYO
U-WAVE FIT, IP67 TYPE
WIRELESS TRANSMITTER FOR MICROMETER
-
107-203 | Indicator Type Micrometer Series 107, 50-75 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 50-75 mm
Order No. : 107-203
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
147-202 | Can Seam Micrometers Series 147 – ไมโครมิเตอร์วัดกระป๋อง | MITUTOYO
Can Seam Micrometers Series 147
ไมโครมิเตอร์วัดกระป๋อง
Order No. : 147-202
Range 0-13 mm
• Measures the width, height, and depth of can seams.
-
122-109-10 | Blade Micrometer – non rotating spindle type – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type – Series 122
Range: 200-225 mm
Order No.: 122-109-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
105-411 | Outside Micrometer with Anvil Extension Collars 1300-1400 mm | MITUTOYO
Order No. 105-411
Outside Micrometer with Anvil Extension Collars
Range : 1300-1400 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-105 | Caliper Type Micrometers Series 143, 100-125 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-105
Range : 100-125 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
326-354-30 | Digital Screw Thread Micrometer IP65 Interchangeable Anvil/Spindle Tip Type 3-4″ | MITUTOYO
Digital Screw Thread Micrometer IP65
Order No. 326-354-30
Range : 3-4″
• Use by installing a suitable interchangeable anvil/spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65,waterproof Digimatic screw thread micrometer with interchangeable anvil/spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils/spindle tips are optional. -
123-112 | Disk Micrometer – Hardened Steel Disk Series 123, 275-300 mm, Disk=30 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-112
Range : 275-300 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range).
