- Sort by Popularity
- Display 12 Products per page
-
311-245 | SQUARE METER SERIES 311 – Squareness/Straightness Measuring | MITUTOYO
• Squareness (perpendicularity) and straightness measurements can be performed accurately and efficiently by just moving a lever. Use the vertical motion handle on the rear of the main unit for operation.
• Highly accurate measurement of squareness and straightness is available by calibrating a square as a master using the built-in perpendicularity adjustment mechanism. Prepare a square to be used for accuracy check/adjustment separately.
• Sliding force: Approx. 2 to 5 N
-
D450 | External measurement – Measuring range : 0-50 mm | KROEPLIN
External measurement
Measuring range : 0-50 mm
Order No. D450
-
526-170-10 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 0.95-1.55mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
บอร์เกจ – สำาหรับรูขนาดเล็กมาก
Order No.: 526-170-10
Range: 0.95-1.55 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø1 to 7 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
530-101 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm
Order No. 530-101
Range : 0 – 150mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
323-353-30 | Disk Micrometer Series 323, 3-4″, Disk 20mm | MITUTOYO
Disk Micrometer
Order No. 323-353-30
Range : 3-4″
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
148-303-10 | Micrometer Heads – Short Thimble with Choice of Diameter – SERIES 148 | MITUTOYO
MICROMETER HEAD – SHORT THIMBLE WITH CHOICE OF DIAMETER – SERIES 148
Order no. 148-303-10
Range: 0-6.5mm
Description :
• Short body design maintains measuring range for limited space applications.
• Available in three thimble diameters to provide ease-of-reading options.
-
150-191 | Micrometer Heads – Medium-size standard Type – SERIES 150 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE – SERIES 150
Order no. 150-191
Range: 0-25mm
Description :
• Measuring range of 25 mm.
-
148-153-10 | Micrometer Heads – Locking-screw Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – LOCKING-SCREW TYPE – SERIES 148
MITUTOYO
Order no. 148-153-10
Range: 0-13mm
Description :
• Locking screw provides secure locking at any position of the spindle.
• Position of the locking screw is the same as the sleeve index line. -
152-332 | Micrometer Head – Large Thimble Type SERIES 152 | MITUTOYO
MICROMETER HEAD – LARGE THIMBLE TYPE SERIES 152
MITUTOYO
ORDER NO. : 152-332
DESCRIPTION :
• Large-diameter thimble for fine adjustment and positioning.
-
04AZA161 | Precision Leadscrew – 6.5mm Stroke | MITUTOYO
PRECISION LEADSCREW | MITUTOYO
Order No. : 04AZA161
Range : 0-6.5 mm
Description :
- Mitutoyo manufacture simple and less expensive precision leadscrews for precise positioning mechanisms and fine-feed mechanisms, in addition to standard micrometer heads..
- Mitutoyo also manufacture leadscrews with special specifications, such as 0.25 mm pitch, as well as those with the standard 0.5 mm feed pitch and with dimensions and forms that meet customer requirements.
-
468-268 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-268
Range : 1.2-1.6″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.
