- Sort by Popularity
- Display 12 Products per page
-
573-618-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 10.1-300mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-618-20
Range 10.1-300 mm
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
536-148 | INSIDE CALIPER SERIES 536, POINT JAW TYPE, 70.1-450mm | MITUTOYO
INSIDE CALIPER SERIES 536
POINT JAW TYPE
Order No.: 536-148
Range : 70.1-450 mm
Description :
• Dedicated caliper for inside measurement.
-
570-313 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – WITH ERGONOMIC BASE, 0-18″ | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
WITH ERGONOMIC BASE
Order No.: 570-313
Range: 0-18″
Description:
This Digimatic height gauge is very precise and reliable, and offers you the following benefits:
- Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur.
- It comes with large and smooth-acting slider hand wheel
- A carbide-tipped scriber is provided.
- SPC data output.
-
518-245 | QM-HEIGHT SERIES 518 – HIGH-PERFORMANCE HEIGHT GAGE | MITUTOYO
QM-HEIGHT SERIES 518 – HIGH-PERFORMANCE HEIGHT GAGE
Order No. 518-245
Description :
This is a high precision ABSOLUTE Digital Height Gauge that offers you the
following benefits:- It has a high accuracy, high resolution ABSOLUTE linear encoder for position detection.
- Types with and without pneumatic drive mechanism
- Automatic running of prelearnt part programs
- You can easily implement frequently used measurements, such as inside/outside diameter and pitch calculations, by icon-based commands that also support easy one-key operation.
- Extraordinary battery life
- GO/±NG judgement is performed by setting the upper and lower tolerances.
-
983527 | INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES, 175-200mm | MITUTOYO
INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES
Order No. 983527
Range: 175-200mm
-
571-211-30 | ABSOLUTE DIGIMATIC DEPTH GAGE SERIES 571, 0-6″/0-150mm | MITUTOYO
ABSOLUTE DIGIMATIC DEPTH GAGE SERIES 571 – MITUTOYO
Order No. 571-211-30
Range : 0-6″ / 0-150mm
Description :
This is a standard model Digital Depth Gauge.
It offers you the following benefits:- ABSOLUTE System gives you reliable measurements.
- Its base and measuring faces are hardened and micro-lapped for robustness.
- Large character height makes measurements easy to read.
- Exceptional battery life.
-
7211 | DIAL DEPTH GAGE SERIES 7, 0-200 mm | MITUTOYO
DIAL DEPTH GAGE SERIES 7
ไดอัลวัดความลึก
Order No. : 7211
Range : 0-200 mm
Description :
This rectangular base dial indicator depth gauge offers you the following benefits:
- Rectangular base.
- It has a hardened, precision ground and micro-lapped reference face on its base.
-
613685-01B | GAUGE BLOCK (CERAMIC) with CALIBRATED COEFFICIENT OF THERMAL EXPANSION, 500mm, GRADE K | MITUTOYO
GAUGE BLOCK (Ceramic)
เกจบล็อคเซรามิค ขนาด 500 มิล
with CALIBRATED COEFFICIENT OF THERMAL EXPANSION
Order No. 613685-01B
Grade : K
Description :
These are metric gauge blocks with a calibrated coefficient of thermal expansion.
They offer you the following benefits:- Mitutoyo offers top-level gauge blocks (steel and ceramic) which are superior to K class blocks, with their quality supported by Mitutoyo‘s best technologies.
- They feature an accurately calibrated thermal expansion coefficient measured with a proprietary double-faced interferometer (DFI).
- Each gauge block is calibrated for length on a highly accurate gauge block interferometer (GBI) system.
- Uncertainty of thermal expansion coefficient: 0.035 x 10-6 /K (k=2).
- Uncertainty of length measurement: 30 nm (k=2), for 100mm blocks.
-
516-955 | Rectangular Gauge Block Sets (56 Block) – Series 516 | Mitutoyo
RECTANGULAR GAUGE BLOCK SETS
เกจบล็อคชุด (56อัน/ชุด)
Order No. : 516-955
-
611823-021 | Individual Metric Rectangular Gauge Blocks – 0.2mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks
Length : 0.2 mm
Order No. : 611823-021
Description:
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
-
516-113 | Micrometer Inspection Gauge Block Sets (16 Block) – Series 516 | Mitutoyo
MICROMETER INSPECTION GAUGE BLOCK SETS
เกจบล็อคชุด (16อัน/ชุด)
Order No. : 516-113
-
516-186 | Micrometer Inspection Gauge Block Sets (10 Block) – Series 516 | Mitutoyo
MICROMETER INSPECTION GAUGE BLOCK SETS (Ceramic)
เกจบล็อคชุด (10อัน/ชุด)
Order No. : 516-186
