- Sort by Price
- Display 12 Products per page
-
160-130 | VERNIER CALIPER SERIES 160 – with nib style jaws and fine adjustment, 0-450mm | MITUTOYO
VERNIER CALIPER SERIES 160
with nib style jaws and fine adjustment
Order No.: 160-130
Range: 0-450 mm
Description :
These vernier calipers with nib style jaws come with or without fine adjustment.
They offer you the following benefits:- For the metric only models the top offset vernier scale allows you to directly read the inside dimensions without having to add the nib widths.
- Main scale and vernier scale satin chrome finish gives you high readability.
-
311-111 | HIGH PRECISION SQUARE SERIES 311 | MITUTOYO
• The High-Precision Square gage is used for inspecting the travel straightness and axial perpendicularity of moving elements on equipment, such as machine tools and CMMs.
• Four precision-lapped reference surfaces, finished using ultra-precision technology built on our experience in gauge blocks.
• Better than 1 μm/300 mm straightness and perpendicularity of each (four) reference surface. In addition, front and back faces are accurate to better than 5 μm/300 mm.
• Three nominal sizes are available (90×110, 160×210 and 260×310 mm) so that you can select the size that best suits the application.
-
H240 | Internal measurement – Measuring range : 40-60 mm | KROEPLIN
Internal measurement
Measuring range : 40-60 mm
Order No. : H240
-
339-102 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 8-9″ | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-102
Range : 8-9″
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
570-322 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – WITH ERGONOMIC BASE, 0-300mm | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
WITH ERGONOMIC BASE
Order No.: 570-322
Range: 0-300 mm
Description:
This Digimatic height gauge is very precise and reliable, and offers you the following benefits:
- Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur.
- It comes with large and smooth-acting slider hand wheel
- A carbide-tipped scriber is provided.
- SPC data output.
-
K1R10 | Tube wall measurement – Measuring range : 0-10 mm | KROEPLIN
Tube wall measurement
Measuring range : 0-10 mm
Order No. K1R10
-
573-634-20 | BLADE TYPE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-150mm | MITUTOYO
573-634-20 | BLADE TYPE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-150mm | MITUTOYO
BLADE TYPE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-634-20
Range : 0-150 mm
Description :
These blade calipers have thin measuring jaws. They offer you the following benefits:
- The thin blade-type jaws fit into very small grooves making it much easier for you to obtain many previously difficult outside measurements.
- The outside measuring faces are carbide.
-
H2M50 | Internal comparison measurement – Measuring range : 50-100 mm | KROEPLIN
Internal comparison measurement
Measuring range : 50-100 mm
Order No. : H2M50
