- Sort by Popularity
- Display 12 Products per page
-
148-319 | Micrometer Heads – Locking-screw Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – LOCKING-SCREW TYPE – SERIES 148
MITUTOYO
Order no. 148-319
Range: 0-6.5mm
Description :
• Locking screw provides secure locking at any position of the spindle.
• Position of the locking screw is the same as the sleeve index line. -
197-101 | Micrometer Head – Long Stroke Non-rotating Spindle SERIES 197 | MITUTOYO
MICROMETER HEAD – LONG STROKE NON-ROTATING SPINDLE SERIES 197
MITUTOYO
ORDER NO. : 197-101
DESCRIPTION :
• Large thimble micrometer head with non-rotating spindle.
• Floating thimble allows easy zero setting at any spindle position.
• Dual-spindle mechanism for quick feed of 1 mm/rev (standard models: 0.5 mm/rev). -
04AZA165 | Precision Leadscrew – 25mm Stroke | MITUTOYO
PRECISION LEADSCREW | MITUTOYO
Order No. : 04AZA165
Range : 0-25 mm
Description :
- Mitutoyo manufacture simple and less expensive precision leadscrews for precise positioning mechanisms and fine-feed mechanisms, in addition to standard micrometer heads..
- Mitutoyo also manufacture leadscrews with special specifications, such as 0.25 mm pitch, as well as those with the standard 0.5 mm feed pitch and with dimensions and forms that meet customer requirements.
-
468-272 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-272
Range : 3-3.5″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-004 | Holtest – Two Point Internal Micrometer Holtest 4-5mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-004
Range. 4-5 mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
368-766 | Holtest (Type II) – 3 Point Internal Micrometer 20-25mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST (TYPE II) MITUTOYO
Order No. : 368-766
Range: 20-25mm
Description
• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
568-373 | ABSOLUTE BOREMATIC SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES 87-100mm | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES
Range : 87-100mm
Order No. : 568-373
Description :
• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
568-966 | ABSOLUTE BOREMATIC SERIES 568 – INTERCHANGEABLE-HEAD BORE GAGE STES | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
INTERCHANGEABLE-HEAD BORE GAGE STES
Order No. : 568-966
Description :
• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
133-172 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 775-800 mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-172
Range : 775-800mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
139-175 | TUBULAR INSIDE MICROMETER SERIES 139 – EXTENSION PIPE TYPE, 100-1300mm | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 139 – EXTENSION PIPE TYPE
Order No.: 139-175
Range : 100-1300mm
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer. -
141-011 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE CARBIDE TIPPED , 200-225mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE – CARBIDE TIPPED
Order No. 141-011
Range: 200-225mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
511-211-20 | BORE GAGE SERIES 511 – FOR SMALL HOLES, 6-10mm | MITUTOYO
BORE GAGE SERIES 511 – FOR SMALL HOLES
Order No. 511-211-20
Range: 6-10mm
Description :
• These gages are designed to measure the diameters of very small holes.
• Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.
• Customized products with a longer rod below the grip or with a carbide anvil are available upon request.
