- Sort by Popularity
- Display 12 Products per page
-
611841 | Individual Metric Rectangular Gauge Blocks – 700mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 700mm | Mitutoyo
Order No. : 611841
Length : 700 mm
Description :
• If using only one length repeatedly, it is suggested to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry. -
IMT-80LK (011181) | TELESCOPING INSPECTION MIRROR | SK NIIGATA SEIKI
TELESCOPING INSPECTION MIRROR
Suitable for inspection of hard-to-see locations
USE
● Inspection of hard-to-see locationsMATERIAL
● Body： Brass
（IMT-60LR, IMT-80LK： Stainless steel）
● Mirror： GlassFEATURES
● Extendable reach and easy to carry
● Replacement mirror also sold separately
●With mirror protective film -
311-113 | HIGH PRECISION SQUARE SERIES 311 | MITUTOYO
• The High-Precision Square gage is used for inspecting the travel straightness and axial perpendicularity of moving elements on equipment, such as machine tools and CMMs.
• Four precision-lapped reference surfaces, finished using ultra-precision technology built on our experience in gauge blocks.
• Better than 1 μm/300 mm straightness and perpendicularity of each (four) reference surface. In addition, front and back faces are accurate to better than 5 μm/300 mm.
• Three nominal sizes are available (90×110, 160×210 and 260×310 mm) so that you can select the size that best suits the application.
-
K450 | External measurement – Measuring range : 0-50 mm | KROEPLIN
External measurement
Measuring range : 0-50 mm
Order No. K450
-
511-501 | BORE GAGE SERIES 511 – ABSOLUTE DIGIMATIC BORE GAGE, 45-100mm | MITUTOYO
BORE GAGE SERIES 511 – ABSOLUTE DIGIMATIC BORE GAGE, 45-100mm | MITUTOYO
Order No. : 511-501
Range: 45-100 mm
Description
• These ABSOLUTE Digimatic bore gages are exclusively designed for inside diameter measurement.
• ABS (ABSOLUTE) type bore gages are not subject to overspeed error.
• Up to four Extension Rods (optional) can be connected for measuring at the bottom of a hole 2 m deep.
• The display and grip can be rotated up to 320° and the display can be inclined up to 90°, so that it is easily readable from any direction.
• The minimum value holding function provides easy measurement of hole diameter. -
573-181-30 | ABSOLUTE SNAP CALIPER SERIES 573, 0-100mm | MITUTOYO
ABSOLUTE SNAP CALIPER SERIES 573
Order No. 573-181-30
Range : 0 – 100mm
Description :
• An ABSOLUTE electromagnetic induction linear encoder system is incorporated.
• Snap mechanism allows continuous and easy measurement without moving the
slider by using the lever.
• Displacement of snap part is 2 mm.
• Measuring force: 7 N to 14 N -
515-520 | UNIVERSAL HEIGHT MASTER Series 515 – Usable in Vertical and Horizontal Orientations | MITUTOYO
• The Universal Height Master is designed for both vertical and horizontal orientation, providing a wide range of applications such as accuracy checking of machine tool table movements.
• Analog display by the built-in counter – the appearance and specifications are the same as 515-322.
-
323-351-30 | Disk Micrometer Series 323, 1-2″, Disk 20mm | MITUTOYO
Disk Micrometer
Order No. 323-351-30
Range : 1-2″
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
148-211-10 | Micrometer Heads – Ultra-small Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – ULTRA-SMALL – SERIES 148
Clamp Nut, Reverse Reading
Order no. 148-211-10
Range: 0-6.5mm
Description :
This ultra-small micrometer head allows you to easily incorporate it into machines and offers you the following benefits:
- Plain stem and a flat spindle end
- Hardened steel measuring surface
-
149-822-10 | Micrometer Heads – Small Standard Type with Carbide-Tipped Spindle – SERIES 149 | MITUTOYO
MICROMETER HEAD – SMALL STANDARD TYPE WITH CARBIDE-TIPPED SPINDLE – SERIES 149
Order no. 149-822-10
Range: 0-15mm
Description :
• Carbide-tipped spindle provides high abrasion resistance.
-
148-151-10 | Micrometer Heads – Locking-screw Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – LOCKING-SCREW TYPE – SERIES 148
MITUTOYO
Order no. 148-151-10
Range: 0-13mm
Description :
• Locking screw provides secure locking at any position of the spindle.
• Position of the locking screw is the same as the sleeve index line. -
110-502-10 | Micrometer Heads – Differential Screw Thread Translator (Extra-Fine Feed) Type – SERIES 110 | MITUTOYO
MICROMETER HEAD – DIFFERENTIAL SCREW THREAD TRANSKATOR (Extra-Fine Feed) – SERIES 110
MITUTOYO
Order no. 110-502-10
Description :
• The differential movement of spindle thread and nut allows ultra-fine feeding.
