- Sort by Popularity
- Display 12 Products per page
-
611748-021 | Individual Metric Rectangular Gauge Blocks – 2.48mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 2.48mm | Mitutoyo
Order No. : 611748-021
Length : 2.48 mm
Description :
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
-
611653-021 | Individual Metric Rectangular Gauge Blocks – 13.5mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 13.5mm | Mitutoyo
Order No. : 611653-021
Length : 13.5 mm
Description :
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
-
573-621-20 | POINT CALIPER SERIES 573-ABSOLUTE DIGIMATIC TYPES, 0-150 mm | MITUTOYO
POINT CALIPER SERIES 573
ABSOLUTE DIGIMATIC TYPES
Order No.: 573-621-20
Range : 0-150 mm
Description :
• Narrow-tip jaws fit into very small grooves and tracks.
• Allows step measurement.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable. -
611843 | Individual Metric Rectangular Gauge Blocks – 800mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 800mm | Mitutoyo
Order No. : 611843
Length : 800 mm
Description :
• If using only one length repeatedly, it is suggested to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry. -
IMT-20R (011140) | TELESCOPING INSPECTION MIRROR | SK NIIGATA SEIKI
TELESCOPING INSPECTION MIRROR
Suitable for inspection of hard-to-see locations
USE
● Inspection of hard-to-see locationsMATERIAL
● Body： Brass
（IMT-60LR, IMT-80LK： Stainless steel）
● Mirror： GlassFEATURES
● Extendable reach and easy to carry
● Replacement mirror also sold separately
●With mirror protective film -
311-113 | HIGH PRECISION SQUARE SERIES 311 | MITUTOYO
• The High-Precision Square gage is used for inspecting the travel straightness and axial perpendicularity of moving elements on equipment, such as machine tools and CMMs.
• Four precision-lapped reference surfaces, finished using ultra-precision technology built on our experience in gauge blocks.
• Better than 1 μm/300 mm straightness and perpendicularity of each (four) reference surface. In addition, front and back faces are accurate to better than 5 μm/300 mm.
• Three nominal sizes are available (90×110, 160×210 and 260×310 mm) so that you can select the size that best suits the application.
-
339-101 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 200-225 mm | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-101
Range : 200-225 mm
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
518-360-13 | LINEAR HEIGHT SERIES 518 – High-Accuracy Height Gage | MITUTOYO
LINEAR HEIGHT SERIES 518
High-Accuracy Height Gage
Linear Height LH-600F/FG
Order No. 518-360-13
Model : LH-600F (without power grip)
Description :
- Improved usability
・ Easy operation using keypad and touch screen navigation, even suitable for beginners
・ Ready to measure through icon defined keys
Adjustable display depending on measurement orientation
Versatile measurements through optional probes - Various options for data output
・ Measurement results can be transferred to PC and smartphone by using optional data communication accessories.
・ Free software is also available for creating an inspection sheet. - Enhanced enviromental resistance
・ Equipped with stain-resistant scale
・Automatic checking of scale status
Meeting demands for machine shops
- Improved usability
