- Sort by Popularity
- Display 24 Products per page
-
500-753-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-753-20
Range : 0-8″
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-193-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
Order No. : 500-193-30
Range : 0-12″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
530-114 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm/0-8″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
Order No. 530-114
Range : 0-200mm/0-8″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
551-224-10 | ABSOLUTE DIGIMATIC CALIPER 551 SERIES – WITH NIB STYLE AND STANDARD JAWS 0-20″/0-500mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 551 SERIES
WITH NIB STYLE AND STANDARD JAWS
Order No.: 551-224-10
Range : 0-20″/0-500mm
Description :
This is a Digimatic caliper with nib-style and standard jaws.
It offers you the following benefits:- Knife-shaped measuring surfaces allow you to take outside measurements.
- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.
-
552-165-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES – with Ceramic Jaws, 0-24″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with Ceramic Jaws
Order No. : 552-166-10
Range : 0-24″
Description :
This is a lightweight standard model of Digimatic caliper with ceramic jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fiber reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
534-110 | LONG JAW VERNIER CALIPER-SERIES 534, 0-500mm | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-110
Range : 0-500 mm
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
-
536-107 | OFFSET CENTERLINE CALIPER SERIES 536, 10.1-300mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 536
Order No.: 536-107
Range : 10.1-300 mm
Description :
This Offset Centerline Caliper enables you to measure center-to-center distance and offers you the following benefits:
- Center-to-center measurements for holes on the same plane or between offset planes
- Edge to center measurements
-
536-152 | NECK CALIPER SERIES 536 – VERNIER TYPE, 0-150mm | MITUTOYO
NECK CALIPER SERIES 573
VERNIER TYPE (Point jaw type)
Order No.: 536-152
Range : 0-150 mm
Description :
• Can measure wall thickness inside bores and recesses.
-
192-614-10 | DIGIMATIC HIGHT GAGE SERIES 192 – MULTI-FUNCTION TYPE with SPC DATA OUTPUT, 0-600 mm | MITUTOYO
DIGIMATIC HIGHT GAGE SERIES 192
MULTI-FUNCTION TYPE with SPC DATA OUTPUT
Order No. 192-614-10
Range : 0-600 mm
Description :
This High Accuracy Height Gauge offers you the following benefits:
- Its double-column structure ensures high measuring accuracy.
- Carbide-tipped scriber provided
- Large character height of 11 mm provides good readability.
-
905200 | SCRIBER – OPTIONAL ACCESSORIES FOR HEIGHT GAGES | MITUTOYO
SCRIBER – OPTIONAL ACCESSORIES FOR HEIGHT GAGES
Order No. 905200
-
129-153 | DEPTH MICROMETER SERIES 129 – INTERCHANGEABLE ROD TYPE, 0-300mm | MITUTOYO
DEPTH MICROMETER SERIES 129
INTERCHANGEABLE ROD TYPE
Order No. : 129-153
Range : 0-300 mm
Description :
This interchangeable rod type micrometer can be used for wide range measurements.
It offers you the following benefits:- ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement
- The ratchet stop provides constant measuring force.
- Measuring rod lock.
-
571-204-10 | ABSOLUTE DIGIMATIC DEPTH GAGE SERIES 571, 0-450mm | MITUTOYO
ABSOLUTE DIGIMATIC DEPTH GAGE SERIES 571 – MITUTOYO
Cannot be used with U-WAVE-TC
Order No. 571-204-10
Range : 0-450 mm
Description :
This is a standard model Digital Depth Gauge.
It offers you the following benefits:- ABSOLUTE System gives you reliable measurements.
- Its base and measuring faces are hardened and micro-lapped for robustness.
- Large character height makes measurements easy to read.
- Exceptional battery life.
