- Sort by Date
- Display 12 Products per page
-
573-191-30 | ABSOLUTE LOW FORCE CALIPER SERIES 573, 0-180mm | MITUTOYO
ABSOLUTE LOW FORCE CALIPER SERIES 573
Order No. 573-191-30
Range : 0-180mm
Description :
• An ABSOLUTE electromagnetic induction linear encoder system is incorporated.
• Enables accurate measurement of plastic parts and other workpieces that are difficult to measure with conventional calipers due to deformation.
• Allows fine feeding easily by using thumb roller.
• Displacement of main scale jaw is 0.3 mm.
• Measuring force: 0.5 N to 1.0 N -
536-171 | HOOK TYPE VERNIER CALIPER SERIES 536, 0-200mm | MITUTOYO
HOOK TYPE VERNIER CALIPER SERIES 536
Order No. 536-171
Range : 0-200 mm (10.1-200)
Description :
• Allows measurement of stepped inside diameter section of cylinders.
-
573-651-20 | NECK CALIPER SERIES 573 – ABSOLUTE DIGIMATIC TYPE, 0-150mm | MITUTOYO
NECK CALIPER SERIES 573
ABSOLUTE DIGIMATIC TYPE
Order No.: 573-651-20
Range : 0-150 mm
Description :
• Can measure wall thickness inside boresand recesses.
• Digimatic models are an IP67 Absolute type. Slider action is smooth, firm and comfortable. -
573-661-20 | TUBE THICKNESS CALIPER SERIES 573 – ABSOLUTE DIGIMATIC TYPE, 0-150 mm | MITUTOYO
TUBE THICKNESS CALIPER SERIES 573
ABSOLUTE DIGIMATIC TYPE
Order No. 573-661-20
Range : 0-150mm
Description :
• The beam-mounted jaw is a round bar that facilitates measurements of tube wall thickness.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable. -
536-121 | POINT CALIPER SERIES 536, 0-150 mm | MITUTOYO
POINT CALIPER SERIES 536
Order No.: 536-121
Range : 0-150 mm
Description :
This vernier point caliper has extra fine ground measuring jaws. It offers you the following benefits:
- Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.
-
573-605-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 10.1-160mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-605-20
Range 10.1-160 mm
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
573-601-20 | OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-150mm | MITUTOYO
OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-601-20
Range : 0-150 mm
Description :
These offset calipers enable you to measure stepped workpieces.
They offer you the following benefits:- You can adjust the beam-mounted jaw to facilitate measurement of stepped sections and hard-to-reach workpiece features.
-
505-730 | DIAL CALIPER SERIES 505 – 0-150mm | MITUTOYO
DIAL CALIPER SERIES 505
Order No.: 505-730
Range : 0-150 mm
Description :
This metric dial caliper allows you to take reliable measurements and offers you the following benefits:
- Ultra-smooth sliding and high shock protection
- Easy to read dial with large character height
