- Sort by Popularity
- Display 12 Products per page
-
122-107-10 | Blade Micrometer – non rotating spindle type – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type – Series 122
Range: 150-175 mm
Order No.: 122-107-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
105-411 | Outside Micrometer with Anvil Extension Collars 1300-1400 mm | MITUTOYO
Order No. 105-411
Outside Micrometer with Anvil Extension Collars
Range : 1300-1400 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-106 | Caliper Type Micrometers Series 143, 125-150 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-106
Range : 125-150 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-126 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 25-50 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-126
Range : 25-50 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
123-116 | Disk Micrometer – Disks with Carbide Tips Series 123, 75-100 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – with Carbide Tips
Order No. 123-116
Range : 75-100 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
389-251-30 | Sheet Metal Micrometer IP65, 0-25mm, Flat Anvil/Spindle | MITUTOYO
SHEET METAL MICROMETER – SERIES 389
This Digimatic Sheet Metal Micrometer is designed with a deep frame, for measuring the thickness of sheet material.
Order No. 389-251-30
Range : 0-25 mm
Measuring Surface : Flat / Flat
• Measures thickness of sheet metal.
• Measuring faces: Carbide.
• Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
• Equipped with Ratchet Stop for constant measuring force. -
395-372-30 | Tube Micrometer – Spherical Anvil and Spindle Type, 1-2″ | MITUTOYO
TUBE MICROMETER – Spherical Anvil and Spindle Type – SERIES 395
Order No. 395-372-30
Range : 1-2″
-
331-353-30 | Spline Micrometer, 2-3″ | MITUTOYO
SPLINE MICROMETER SERIES 331
Order No. 331-353-30
Range. : 2-3″
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• IP65 water / dust protection.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
112-156 | Point Micrometer – Series 112, 75-100 mm | MITUTOYO
POINT MICROMETER – SERIES 112
Order No. : 112-156
Range : 75-100 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
114-121 | V-Anvil Micrometer – 5 Flute, 5-25 mm | MITUTOYO
V-ANVIL MICROMETER – 5 FLUTE
Order No. : 114-121
Range : 5-25 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
167-121 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-121
Length : 525 mm
-
167-378 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-378
Length : 1350 mm
