- Sort by Popularity
- Display 12 Products per page
-
611719-021 | Individual Metric Rectangular Gauge Blocks – 2.19mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 2.19mm | Mitutoyo
Order No. : 611719-021
Length : 2.19 mm
Description :
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
-
611750-021 | Individual Metric Rectangular Gauge Blocks – 2.6mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 2.6mm | Mitutoyo
Order No. : 611750-021
Length : 2.6 mm
Description :
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
-
611625-021 | Individual Metric Rectangular Gauge Blocks – 15mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 15mm | Mitutoyo
Order No. : 611625-021
Length : 15 mm
Description :
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
-
611676 | Individual Metric Rectangular Gauge Blocks – 60mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks – 60mm | Mitutoyo
Order No. : 611676
Length : 60 mm
Description :
• If using only one length repeatedly, it is suggested to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry. -
148-858 | Micrometer Heads – Small Thimble Dimeter Standard Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – SMALL THIMBLE DIMETER STANDARD TYPE – SERIES 148
Order no. 148-858
Range: 0-13mm
Description :
• Measuring range of 13 mm.
• The thimble can be set to zero at any position by loosening the setscrew. -
IMT-100R (011187) | TELESCOPING INSPECTION MIRROR | SK NIIGATA SEIKI
TELESCOPING INSPECTION MIRROR
Suitable for inspection of hard-to-see locations
USE
● Inspection of hard-to-see locationsMATERIAL
● Body： Brass
（IMT-60LR, IMT-80LK： Stainless steel）
● Mirror： GlassFEATURES
● Extendable reach and easy to carry
● Replacement mirror also sold separately
●With mirror protective film -
515-376 | DIGITAL HEIGHT MASTER Series 515 | MITUTOYO
• For calibrating and setting height gages.
• Staggered arrangement of block stack have two measuring faces on the same level, one facing up and the other down.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
-
500-776 | SuperCaliper SERIES 500 – NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER | MITUTOYO
SuperCaliper SERIES 500
NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER
Brand : MITUTOYO
Order No. : 500-776
Range : 0-150 mm
Description :
This IP67 solar-powered digimatic SuperCaliper with ABSOLUTE system is a robust, high performance model and offers you the following benefits:
- Waterproof reliability
- Impact resistance of the display unit for improved usability in workshop conditions
- It operates in only 60 lux ambient lighting.
- Even if the illumination is temporarily less than 60 lux measuring can be performed by charging a super capacitor.
- Excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid
-
329-250-30 | DEPTH MICROMETER SERIES 329 – INTERCHANGEABLE ROD TYPE, 0-150 mm | MITUTOYO
DEPTH MICROMETER SERIES 329
INTERCHANGEABLE ROD TYPE
Order No. : 329-250-30
Range : 0-150 mm
Description :
This interchangeable rod type micrometer can be used for wide range measurements.
It offers you the following benefits:- ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement
- The ratchet stop provides constant measuring force.
- Measuring rod lock.
-
EPDS2-SD | EPOCH SD(S-DLC) DEEP SQUARE – END MILLS | MOLDINO
EPOCH SD(S-DLC) DEEP SQUARE
ดอกเอ็นมิลล์
High welding resistance makes it ideal for machining aluminum alloys and copper. DLC coating.
**กรณีต้องการใบเสนอราคา กรุณาระบุขนาดที่ลูกค้าต้องการเพื่อความรวดเร็วในการจัดทำใบเสนอราคา**
