- Sort by Popularity
- Display 12 Products per page
-
611802 | Gauge Blocks with a Calibrated Coefficient of Thermal Expansion – 125mm | Mitutoyo
Gauge Blocks with a Calibrated Coefficient of Thermal Expansion – 125mm | Mitutoyo
Order No. : 611802
Length : 125 mm
Description :
• Mitutoyo offers top-quality gauge blocks (steel and ceramic), superior to K class blocks due to their advanced manufacturing technologies.
• Features an accurately calibrated thermal expansion coefficient measured with a proprietary double-faced interferometer (DFI). Each gauge block is calibrated for length on a highly accurate gauge block interferometer (GBI) system.
• Available as rectangular gauge blocks in the range 100 to 500 mm. -
151-211 | Micrometer Heads – Medium-size standard Type with 8mm Diameter Spindle – SERIES 151 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE
With 8mm Diameter Spindle – SERIES 151
MITUTOYO
Order no. 151-211
Range: 0-25mm
Description :
• Larger spindle (ø8 mm) for heavy-duty applications (normally ø6.35 mm).
-
515-723 | CHECK MASTER SERIES 515 | MITUTOYO
• Designed to check the accuracy of table movements of machine tools and calibrate CMMs. Permanently wrung stack of gauge blocks is housed in a rigid frame.
• Can be used in either vertical or horizontal orientation.
-
536-212 | SWIVEL VERNIER CALIPER SERIES 536 – MOVING JAW TYPE, 0-200mm | MITUTOYO
SWIVEL VERNIER CALIPER SERIES 536
MOVING JAW TYPE
Order No. 536-212
Range : 0-200mm
Description :
These vernier calipers have a swivelling jaw. They offer you the following benefits:
- You can rotate the moving jaw to measure sectioned shafts.
- With depth bar.
-
ENDMILLS – STANDARD LENGTH SERIES 140A M.A.FORD
Solid Carbide TuffCut® GP 4 Flute End Mill Ball NoseDesigned for milling fillets or similar rounded corners in the bottom of a cut. Ideal for most ferrous metal applications.- • 4 Flute
- • Solid carbide
- • Uncoated or available with TiN, ALtima® and TiCN coating. T=TiN, A=ALtima® (ALTiN), C=TiCN coated
- • Center cutting
- • Standard flute lengths
- • Ball nose
- • 30° Helix angle
- • For roughing and finishing applications
- • Material Applications: Steels, Hardened Steels, Stainless Steels, Cast Iron, Special and High Temp Alloys, Non-Ferrous
-
340-251-30 | Outside Micrometer with Interchangeable Anvils, 0-150 mm | MITUTOYO
340-251-30
Outside Micrometer with Interchangeable Anvils | 0-150 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force.
