- Sort by Popularity
- Display 12 Products per page
-
530-321 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*Carbide-Tipped jaws for outside measurement*
Order No. 530-321
Range : 0 – 200 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
551-301-20 | ABSOLUTE DIGIMATIC CALIPER 551 SERIES – WITH NIB STYLE AND STANDARD JAWS 0-200mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 551 SERIES
WITH NIB STYLE AND STANDARD JAWS
Order No.: 551-301-20
Range : 0-200mm
Description :
This is a Digimatic caliper with nib-style and standard jaws.
It offers you the following benefits:- Knife-shaped measuring surfaces allow you to take outside measurements.
- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.
-
552-160-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with Long Jaws, 0-18″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with Long Jaws
Order No. : 552-160-10
Range : 0-18″
Description :
This is a lightweight standard model of Digimatic caliper with extra-long jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
160-151 | VERNIER CALIPER SERIES 160 – with nib style jaws and fine adjustment, 0-18″/0-450mm | MITUTOYO
VERNIER CALIPER SERIES 160
with nib style jaws and fine adjustment
Order No.: 160-151
Range: 0-18″ / 0-450 mm
Description :
These vernier calipers with nib style jaws come with or without fine adjustment.
They offer you the following benefits:- For the metric only models the top offset vernier scale allows you to directly read the inside dimensions without having to add the nib widths.
- Main scale and vernier scale satin chrome finish gives you high readability.
-
573-608-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 10.1-300mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-608-20
Range 10.1-300 mm
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
536-148 | INSIDE CALIPER SERIES 536, POINT JAW TYPE, 70.1-450mm | MITUTOYO
INSIDE CALIPER SERIES 536
POINT JAW TYPE
Order No.: 536-148
Range : 70.1-450 mm
Description :
• Dedicated caliper for inside measurement.
-
570-227 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – STANDARD MODEL, 0-200mm | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
STANDARD MODEL
Order No. 570-227
Range : 0-200 mm
Description :
This Digimatic height gauge is very precise and reliable, and offers you the following benefits:
- Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur.
- Fine-adjustment gives you precise positioning.
- It comes with large and smooth-acting slider hand wheel for coarse- and fine-adjustments (570-3xx only).
- A carbide-tipped scriber is provided.
- SPC data output.
-
527-203 | VERNIER DEPTH GAGE SERIES 527, 0-300mm | MITUTOYO
VERNIER DEPTH GAGE SERIES 527
Order No. 527-203
Range : 0-300 mm
Description :
This vernier depth gauge offers you the following benefits:
- Its base and measuring faces are hardened and micro-lapped for robustness.
- Fine adjustment models available
-
983511 | INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES, 75-100mm | MITUTOYO
INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES
Order No. 983511
Range: 75-100 mm
-
527-402 | DEPTH GAGE SERIES 527, HOOK END TYPE, 0-200mm | MITUTOYO
DEPTH GAGE SERIES 527 – HOOK END TYPE
Order No. : 527-402
Depth Range.: 10-200 mm
Hook Range : 0-200 mm
Description :
This hook type vernier depth gauge offers you the following benefits:
- The end of the beam is hook-shaped so you can take depth and thickness measurements of a projected portion or lip in a hole, as well as standard depth measurements.
- Fine adjustment models are available.
-
547-252 | ABSOLUTE DIGIMATIC DEPTH GAGE SERIES 547, 0-200mm | MITUTOYO
ABSOLUTE DIGIMATIC DEPTH GAGE SERIES 547
Order No. 547-252
Range : 0-200 mm
Description :
This ABSOLUTE Digimatic Indicator Depth Gauge offers you the following benefits:
- It is equipped with the ABSOLUTE Digimatic Indicator ID-C.
- It has a hardened, precision ground and micro-lapped reference face on its base.
-
516-596 | Rectangular Gauge Block Sets (122 Block) – Series 516 | Mitutoyo
RECTANGULAR GAUGE BLOCK SETS
เกจบล็อคชุด (122อัน/ชุด)
Description :
Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required by the target applications, the level of convenience desired and the environmental conditions in which they will be used.
