- Sort by Popularity
- Display 12 Products per page
-
103-176 | Outside Micrometer Series 103, 975-1000 mm | Mitutoyo
Outside Micrometer Series 103
Range 975-1000 mm
Graduation 0.01 mm
Order No. 103-176
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
406-353-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 3-4″ | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 3-4″
Resolution : 0.00005″/0.001 mm
Order No. : 406-353-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
147-105 | Can Seam Micrometers Series 147 – ไมโครมิเตอร์วัดกระป๋อง | MITUTOYO
Can Seam Micrometers Series 147
ไมโครมิเตอร์วัดกระป๋อง
Order No. : 147-105
Range 0-13 mm
• Measures the width, height, and depth of can seams.
-
122-104-10 | Blade Micrometer – non rotating spindle type – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type – Series 122
Range: 75-100 mm
Order No.: 122-104-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
105-105 | Outside Micrometer with Anvil Extension Collars 700-800 mm | MITUTOYO
Order No. 105-105
Outside Micrometer with Anvil Extension Collars
Range : 700-800 mm
MITUTOYO
• Adjustable measuring range with extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
343-353-30 | Caliper Type Micrometers Series 343, 3-4″ | MITUTOYO
Caliper Type Micrometers Series 343
Order No. 343-353-30
Range : 3-4″
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-127 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 50-75 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-127
Range : 50-75 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
123-113 | Disk Micrometer – Disks with Carbide Tips Series 123, 0-25 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – with Carbide Tips
Order No. 123-113
Range : 0-25 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
369-353-30 | Disk Micrometer – Non-Rotating Spindle, IP65 Inch/Metric, 3-4″ | MITUTOYO
Disk Micrometer – Non-Rotating Spindle – IP65
Order No. : 369-353-30
Range : 3-4″
Disk : 20mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module.
• Equipped with Ratchet Stop for constant measuring force. -
115-115 | Tube Micrometer, 0-25mm | MITUTOYO
TUBE MICROMETER – SERIES 115
Order No. 115-115
Range : 0-25 mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
331-261-30 | Spline Micrometer, 0-25mm | MITUTOYO
SPLINE MICROMETER SERIES 331
Order No. 331-261-30
Range. : 0-25 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• IP65 water / dust protection.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
342-363-30 | Point Micrometer – Series 342, 2-3″ | MITUTOYO
POINT MICROMETER – SERIES 342
Order No. : 342-363-30
Range : 2-3″
• Ideal tool for measuring drill web diameters, small grooves and other hard-to-reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• IP65 Digimatic micrometers.
• Equipped with Ratchet Stop for constant measuring force.
