- Sort by Popularity
- Display 12 Products per page
-
111-118 | Spline Micrometer, 75-100 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-118
Range. : 75-100 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
112-167 | Point Micrometer with Carbide Tip – Series 112, 50-75 mm | MITUTOYO
POINT MICROMETER with Carbide tip – SERIES 112
Order No. : 112-167
Range : 50-75 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
154-102 | SMALL HOLE GAGE เกจวัดรูใน- SERIES 154 | MITUTOYO
SMALL HOLE GAGE – SERIES 154
- Designed to be locked in position (with knurled lockscrew) and the diameter measured across the two lobes with a micrometer after withdrawal from the hole
Order No. 154-102
-
350-361-30 | Digimatic Micrometer Head – Series 350 | MITUTOYO
DIGIMATIC MICROMETER HEAD – SERIES 350
Order no. 350-361-30
Stroke: 1″
Description :
• Equipped with digital display and output.
• 350-28X-30, 350-261-30, 350-38X-30 and 350-361-30 are protection grade IP65, water-proof Digimatic micrometer heads.
• Digimatic models can be easily integrated into statistical process control and measurement systems. -
406-251-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 25-50 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 25-50 mm
Resolution : 0.001 mm
Order No. : 406-251-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
293-145-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-245-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 25-50 mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-582 | Digimatic Outside Micrometer Series 293, 300-325 mm | MITUTOYO
Digimatic Outside Micrometer Series 293
Range : 300-325 mm
Order No. 293-582
• Constant measuring force: ratchet stop
• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as
Excel.
• Measuring faces: Carbide. -
102-702 | Ratchet Thimble Micrometer Series 102 – Outside Micrometer, 25-50 mm, 0.01 mm | MITUTOYO
Ratchet Thimble Micrometer – Outside Micrometer
Range : 25-50 mm
Graduation : 0.01 mm
Order No. 102-702• More accurate in easy one-handed operation.
• Ratchet function works both from the thimble and the speeder.
• Rotating the thimble/speeder causes the ratchet mechanism to operate and apply a constant measuring force to the workpiece.
• Heat-insulated frame.
• Measuring faces: Carbide. -
103-167 | Outside Micrometer Series 103, 750-775 mm | Mitutoyo
Outside Micrometer Series 103
Range 750-775 mm
Graduation 0.01 mm
Order No. 103-167
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
107-204 | Indicator Type Micrometer Series 107, 75-100 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 75-100 mm
Order No. : 107-204
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
146-132 | Groove Micrometers -Rotating Spindle Series 146 – 0-1″, 0.5″ Flange | MITUTOYO
Groove Micrometers – Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-132
Flange : 0.5 mm
