- Sort by Popularity
- Display 12 Products per page
-
125-102 | Screw Thread Micrometer, 0-25 mm, 0.6-0.9 mm/44-28TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-102
Range : 0-25 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
323-253-30 | Disk Micrometer Series 323, 75-100 mm, Disk 20mm | MITUTOYO
Disk Micrometer
Order No. 323-253-30
Range : 75-100 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
124-177 | Gear Tooth Micrometer, 100-125 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 124-177
Range : 100-125 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Equipped with Ratchet Stop for constant measuring force.
• Ball anvil / spindle tips: optional. -
389-714 | Sheet Metal Micrometer IP65, 0-1″, 12″ Throat, Flat Anvil/Spindle | MITUTOYO
SHEET METAL MICROMETER – SERIES 389
This Digimatic Sheet Metal Micrometer is designed with a deep frame, for measuring the thickness of sheet material.
Order No. 389-714
Range : 0-1″
Throat depth : 12″
Measuring Surface : Flat / Flat
• Measures thickness of sheet metal.
• Measuring faces: Carbide.
• Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
• Equipped with Ratchet Stop for constant measuring force. -
115-216 | Tube Micrometer – Spherical Anvil and Spindle Type, 25-50mm | MITUTOYO
TUBE MICROMETER – Spherical Anvil and Spindle Type – SERIES 115
Order No. 115-216
Range : 25-50 mm
• Measuring faces: Carbide.
(115-201: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
111-119 | Spline Micrometer, 100-125 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-119
Range. : 100-125 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
112-168 | Point Micrometer with Carbide Tip – Series 112, 75-100 mm | MITUTOYO
POINT MICROMETER with Carbide tip – SERIES 112
Order No. : 112-168
Range : 75-100 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
154-103 | SMALL HOLE GAGE เกจวัดรูใน- SERIES 154 | MITUTOYO
SMALL HOLE GAGE – SERIES 154
- Designed to be locked in position (with knurled lockscrew) and the diameter measured across the two lobes with a micrometer after withdrawal from the hole
Order No. 154-103
-
169-201-10 | Disk Micrometer – Non-Rotating Spindle, 0-25mm | MITUTOYO
Disk Micrometer – Non-Rotating Spindle
Order No. : 169-201
Range : 0-25 mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module.
• Equipped with Ratchet Stop for constant measuring force. -
340-251-30 | Outside Micrometer with Interchangeable Anvils, 0-150 mm | MITUTOYO
340-251-30
Outside Micrometer with Interchangeable Anvils | 0-150 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
293-146-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 25-50 mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 25 – 50 mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-246-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 50 – 75 mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system.
